Tom BandPass

Tom BandPass free filter by Gersic.com

Tom BandPass is a free filter VST plugin developed by Gersic.com. Compatible OS(s): Windows.

Tom BandPass is a simple band pass filter.

All TomPak filters are biquad filters based on transfer functions which are derived from analog prototypes.

http://www.gersic.com/

TigerDelay

TigerDelay free delay | echo | filter by Neuenberger

TigerDelay is a free delay and echo and filter VST plugin developed by Neuenberger. Compatible OS(s): Windows.

TigerDelay is a delay plug-in with a 24dB resonant low-pass filter and a compression function for ducking.

Features / controls::

  • Tempo (either in ms, or as note-value (1/4, 1/8 dotted, 1/16 Triplet etc.).
  • Sync / Async to beat.
  • Ducking.
  • Dry/Wet.
  • Feedback.
  • Cutoff.
  • Resonance.

http://software.neuenberger.de/

The Filtermate

The Filtermate free filter | ring-modulator by Synthescience

The Filtermate is a free filter and ring modulator VST plugin developed by Synthescience. Compatible OS(s): Windows.

The Filtermate plugin was built as a “Rhythmic Filter Module”, as such it is designed for making automated or non automated filter processing to any given audio material that is fed into it with the minimum of controllers.

Basically it consists on a Clock driver that animates an LFO (Low frequency oscillator) which is coupled to a multimode filter and a mixer, a design very often found on the front panels of many vintage synthesizers, but this time as an independent plugin for you to tweak at your own will.

The Filtermate is fully automatable and has the ability to store 64 presets. It ships with a few already pre programmed ones that will show what its all about and may be the starting point to your individual creations.

Installation procedure: Unzip the file, then copy the DLLs into your VstPlugins folder.

Made with SynthEdit

TAL-Filter II

TAL-Filter II free filter by Togu Audio Line

TAL-Filter II is a free filter VST, Audio Unit, AAX plugin developed by Togu Audio Line. Compatible OS(s): Windows, macOS.

TAL-Filter-2 is a host-synced filter module with different filter types, panorama and volume modulation possibilities.

The device includes all 4x oversampled TAL-NoiseMaker filters: LP 24 dB, LP 18dB, LP 12dB, LP 6dB, HP 12 dB, BP 12dB, N 12 dB. It’s possible to saturate / distort the input signal by raising the input volume with the input control (only if you use a filter as modulation type). It’s also possible to modulate the panorama or volume of an incoming signal. This can be used for tremolo or trance gate effects. Panorama modulation maybe is useful to pan your percussion, hats or sound effects in the stereo room for more interesting rhythms and sounds.

Features:

  • Create host / beat synced modulations.
  • Easy to use graphical editor (double click deletes points, a click adds one).
  • 4x oversampled TAL-NoiseMaker filters.
  • Different filter types: LP 24 dB, LP 18dB, LP 12dB, LP 6dB, HP 12 dB, BP 12dB, N 12 dB.
  • It’s possible to saturate / distort the input signal by raising the input volume (only for filters).
  • Panorama modulation (-3dB).
  • Volume modulation.
  • Different modulation tempo (x1, x2, .. x32).
  • Depth control as a simple way to control the modulation intensity.

https://tal-software.com/

TAL-DUB-III

TAL-DUB-III free delay | echo | filter by Togu Audio Line

TAL-DUB-III is a free delay and echo and filter VST, Audio Unit plugin developed by Togu Audio Line. Compatible OS(s): Windows 64b, macOS.

TAL-DUB-III is an easy-to-use delay device with some special features. It’s no tape delay emulation and has its own sound. It has an alias-free saturation stage, a non-linear 6dB low-pass and a 3dB high-pass filter that are included in the feedback path of the device. An input drive knob allows to adjust the saturation level. Pop-up menus show the current values of volume, delay-time and feedback knobs. A tab button allows to adjust the delay time for live sessions.

Features:

  • Delay time up to 4 seconds.
  • Non linear 6dB Low-Pass filter.
  • 3dB High Pass filter.
  • Alias free saturation, adjustable with the input drive knob.
  • Delay x2 for each channel.
  • Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and tripled and dotted notes).
  • Pop-ups show the actual values dB (input drive, dry, wet), ms (delay), 0..2 (feedback).
  • LED-meter shows the saturation level.
  • Tab button for delay time.
  • MIDI Learn for all knobs.
  • The feedback knob is especially optimized for doing infinite delays.

https://tal-software.com/

TAL-DUB-II

TAL-DUB-II free delay | echo | filter by Togu Audio Line

TAL-DUB-II is a free delay and echo and filter VST, Audio Unit plugin developed by Togu Audio Line. Compatible OS(s): Windows 64b, macOS.

TAL-DUB-II is an extended version of TAL-Dub with a completely new sound engine. A 4x over-sampled distortion stage allows you to add vintage distortion to the delayed signal (it is also possible to make clean delays). A sinus LFO has the possibility to modulate delay time and low pass filter cutoff. Adjustable LFO stereo width is also included. An analog sounding 6dB low pass filter with resonance and a 3dB high cut filter are also parts of TAL-DUB-II. Different routing options open a wide range of possibilities.

Features:

  • Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and tripled and dotted notes).
  • 4x over-sampled distortion stage.
  • VU-Meter shows gain reduction.
  • LFO (low pass cutoff and delay modulation, stereo width).
  • 6dB resonance low pass filter.
  • 3dB high pass filter.
  • MIDI learn for all pots.
  • 20 factory presets.
  • Documentation.

https://tal-software.com/

TAL-Dub

TAL-Dub free delay | echo | filter by Togu Audio Line

TAL-Dub is a free delay and echo and filter VST, Audio Unit plugin developed by Togu Audio Line. Compatible OS(s): Windows 64b, macOS.

TAL-Dub is a vintage delay effect. It can be used for a wide range of effects from clean to extreme distorted, resonating, never ending, delays.

Features:

  • 12dB resonance filter.
  • Low cut filter.
  • Limiter/Distortion for high feedbacks.
  • Delay time and feedback for each channel with link.
  • Input signal swap.
  • Filter feedback and filter fx mode.
  • Filter mode for input (can also be used as filter module).
  • Easy to use MIDI learn.
  • 20 presets.

https://tal-software.com/

T. Rex Cut & Rez Mini

T. Rex Cut & Rez Mini free filter by Max Project

T. Rex Cut & Rez Mini is a free filter VST plugin developed by Max Project. Compatible OS(s): Windows.

T. Rex Cut & Rez: is a multi-mode filter.

It combines 7 different filter types.

Vintage analogue GUI Design.

Made with FlowStone

http://maxproject.wix.com/maxproject

T-RackS CS

T-RackS CS free multi-fx | overdrive | saturation | bit-crusher | crunch | panner | pitch-shifter | phaser | flanger | eq | compressor | limiter | amp-simulator | filter by IK Multimedia

T-RackS CS is a free multi fx and overdrive and saturation and bit crusher and crunch and panner and pitch shifter and phaser and flanger and eq and compressor and limiter and amp simulator and filter VST, Audio Unit, RTAS, AAX plugin developed by IK Multimedia. Compatible OS(s): Windows 64b, macOS.

Close your eyes and picture a store full of cool, powerful processing gear including compressors, limiters, reverbs, de-essers, multiband processors, and a shelf full of vintage, legendary gear emulations. In short, a dream store for recording musicians, engineers and producers.

It is not just a fantasy. This store is real and it’s available to you 24/7. In the T-RackS 5 Custom Shop you can browse a huge collection of IK’s high-quality processing plug-ins for mixing and mastering and purchase only the ones you want, when you want them. And the best part is, you can get started for free.

Features

  • Free version of T-RackS including the Custom Shop, the Classic EQ and basic Metering functionality.
  • Standalone workstation, plugin suite and single plugins for Audio Units, VST2, VST3 and AAX formats.
  • Custom Shop functionality lets you purchase additional modules from inside the program.
  • T-RackS shell allows for chaining of up to 16 processors.
  • Standalone integration with ARC System 2.5 processing.
  • All processors available as individual plug-ins.
  • 64-bit native support.
  • High-fidelity oversampling for high-quality audio processing through the entire signal path.
  • SCC technology coupled with IK’s unique DSM technology provides the most realistic software emulation of vintage gear to date.
  • Extremely easy to use, with style-based presets, full chain visualization, one-click single module or chain bypass, “compare” function and more.

What’s new

  • 4 new processors available for separate purchase: Master Match, Dyna-Mu, ONE, EQual.
  • Resizable*, redesigned interface and plugin GUIs.
  • Expandable broadcast-ready metering suite*.
  • Floating meters option*.
  • Chains of up to 16 processors.
  • Album Assembly section with waveform editing and metadata*.
  • Enhanced audio engine.
  • Up to 192 kHz/32-bit floating point*.
  • 4 dithering algorithms.
  • Equal gain option*.
  • Signature presets from the industry’s top engineers*.

* Features available by upgrading to T-RackS 5, T-RackS 5 Deluxe or T-RackS 5 MAX. T-RackS 5 CS supports projects up to 48kHz and features basic metering functions. Presets require specific modules which might not be part of this version of T-RackS 5. You can however download any processor for free and test them for 14 days before purchase.

http://www.ikmultimedia.com/

SynthTrack

SynthTrack free filter by 2Rule

SynthTrack is a free filter VST plugin developed by 2Rule. Compatible OS(s): Windows, macOS.

SynthTrack is a rhythmic effect plugin that uses track audio as a source. Applied to audio tracks (chords, vocals etc..), this plugin makes Filter/Amp ADSR and LFO effects triggered by 16 step sequencer pattern. With this effect, you can change rhythmic characteristic of the wave in the track. It’s suitable for creating typical rhythmic gated pad sounds. With the envelope controlled step sequencer, it’s possible to turn your pad sound into an arp-like sequence.
This plugin can be synchronized to the host sequencer / DAW tempo when available.

Demos.

{See video at top of page}

Features:

  • 16 steps per pattern.
  • Host tempo synchronization (where available).
  • HP BP LP Filter.
  • ADSR for Amplitude.
  • ADSR for Filter.
  • LFO Sinus Square-Saw waves, tempo-synchronized.
  • Push for button for one shot gate.
  • 26 Presets.

https://akyuz5.wixsite.com/mysite