Download Category: Stereo Imaging

Pentaphonizer offers stereo to five-channel-surround translation.

Features

Cinetic section:

• Analysis of the main frequency (pitch tracker) and the intensity (volume tracker) of the two channels of a stereo input signal.
• Modulation of the X/Y position of the two inputs according to the analyzed signal : center position, amplitude of the movement and smoothness.
• Each channel tracker can control the X or Y position of the two inputs.
• Spatial areas settings for each output.

Spectral section:

• Division of the two inputs signals in four frequency bands with three crossover filters.
• Each frequency band can be freely positioned (and automated) inside the 2D space.
• Intensity settings for each band / channel
• Spatial areas settings for each output.
• Possibility to view the spectrum of each band / channel.

Plus:

• Stereo reverberation section with spatial position of the two channels.
• Easy combination of the three sections with a separate volume adjustment, the 2D view shows only the objects that correspond to an active section.
• Pre-assigned MIDI controller numbers for easy use with a control surface.
• 128 patches, help screen.

The full featured freeware version has 8 delays instead of 16.

http://acousmodules.free.fr/

Multiband StereoFaker uses a six bands filter to spread a mono signal to “fake” stereo signal, it has panning+LFO on every band so you can make dynamic effects, you can make slow and subtle changes as well as making extreme panning modulation, it works great on drumloops and strings and it works specially nice on synths.

https://www.kvraudio.com/developer/klanglabs

Using Multiband Stereo Image Modifier Lite you can freely change the sense of space, in 3 different frequency-ranges. Mid/Side mode optimalizes the audio sign. You can change the volume or stereo image with the Mid/Side volume functions:

• Graphic frequency range handler interface: It can manage 3 different frequency ranges. The overlay of the different ranges can be changed with the vertical white lines. The ranges are colour-coded. When used, the vectorscope shows the stereo images of the ranges, and therefore you can see on the graphic display if the sense of space is correct.
• Side volume: Adds to the sense of space. In middle-state there is no change. Pushing the slider up the sign changes to mono, pushing it down adds to the sense of space. Deafult value is 128.
• Mid volume: Changes the volume of the mid-channel Useful function, because it lowers the middle sounds’volume – like the kickdrum or the vocal zone. Default volume is 256.
• Volume: All 3 frequency-ranges’ volume can be changed separately.
• Modifier on/off: In off mode the switch turns off all the effects in the program.
• Band buttons: These buttons are used to turn on and off the different frequency-ranges. When turned off, it turns off the whole stream of signs from the ranges – meaning that both effects and the original sign will be turned off. In this state the frequency-ranges’ interface can’t be seen, therefore it’s easy to tell which range is on or off.

http://www.bitsonic.eu/