Download Category: Overdrive

Down the hatch is an amplifier simulator plug-in for the guitar. It features simple distortion into a comb filter-based cabinet simulator into your choice of additional grit.

https://runbeerrun.blogspot.com/

Distortionator Mk2 is a simplistic distortion plugin, with two modes. The first mode is a modified threshold-type distortion (although the modification isn’t particularly noticeable, sound-wise). The second mode is called Sine Wave distortion, although it’s actually closer to frequency-modulation, as the audio input is used as the index to a sin() function.http://www.niallmoody.com/ndcplugs

Distortion M Plus is a multiband distortion plug-in system that allows you to apply a different amount of distortion by frequency zones.

Features:

• Standard Distortion.
• EQ Section.
• Multiband Distortion.
• Dual-Stage Distortion.

http://mzkmediatech.megabyet.net/

DistBit is a flexible distortion/shaping effect intended for use on a wide variety of material. It consists of a pair of multi-mode filters, a pair of distortion units, and a routing system to allow all various combinations of the four devices on the signal.

It was inspired by the Scream4 unit in Propellerhead Software’s Reason.

http://AppliedCuriosity.cc

Dirty Fuzz is the Classic FUZZ Sound with the addition of more dirt.

http://damyfx.altervista.org/

Digital Tube will raise the total overall volume to achieve digital clip distortion.

http://www.retrosampling.se/

DemonWave is a simple waveshaper, with envelope filtering computed from the input signal. It produces a harsh sound.

This plug-in uses the host’s default GUI

http://chaotik.free.fr/

CrunchDude is a simple guitar amplifier emulation. As the name implies, its strength lies not only in clean or over-the-top lead sounds, but especially in the crunch sounds it can produce.

Features:

• The Input section. No distortion takes place here yet, only amplification and equalization plus a Low Cut control (which determines the cut-off frequency of the 6 dB/octave filter).
• Two Pre-amp sections. These are switched in series, and are completely equivalent. You can switch them on and off. They have a 3-band equalizer with adjustable cut-off frequencies, and a Drive dial that determines the gain and the resulting distortion. The equalizer is “passive”, which means that when Low, Mid, and High are in maximum position, no alteration of the sound takes place (flat frequency response, 0 dB gain).
• The Output Stage section. Again, you have the same type of 3-band equalizer at your disposal, an Output level dial, and an extra Low Cut.
• The Cabinets section. There are two almost identical sections in parallel here, which you can balance with the Mix dial. You can switch this section off. The sound of both sections is determined by their Prox (proximity) and Fdb (feedback) dials.

http://www.heebcomponents.net/CrunchDude/

CompactDistortion is a Stomp Box distortion simulator.

Features:

• Distortion Section:
  • Input Gain.
  • Color (Set the character of the distortion).
  • Compression.
• LowPassFilter Section:
  • Pre/Post (Position the LPF Pre or Post Distortion).
  • LPF Cutoff and Q (Resonance).
  • Envelope Follower.
• PreHPF Cutoff.
• Tone and Volume.

http://www.geocities.jp/webmaster_of_sss/vst/