Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
B8 Organ is a reproduction of the old organs of the ’60s and ’70s. It has 9 oscillators, switchable between sine and saw wave, with drawbars, vibrato, chorus and reverb. Sine waves result in tones typical of a church organ, or “hammond-type” sounds. Saw waves sound more like old combo organs, like Farfisas, Davoli, Crumar, for example.
http://www.autodafe.net/
B-station 2 is a simple but powerful bass plugin.
Features:
- 3 oscillators: Every oscillator has a fine tune, octave, pw, volume and 5 different waveforms.
- Mod oscillator for Pulse width and for phase modulation.
- 4 filters types: Low-pass / band-pass / hi-pass / 4-pole. The filter has an envelope ADSRLT, 12 curves and a BPM LFO.
- Modulation Envelope for pitch and Pulse width.
- Vibrato, Bitcrusher, Drive, Low- / Hi-boost.
- Arpeggiator.
- Velocity filter and volume on / off.
- Glide / Retrigger and a master volume.
https://theodosynthsarchive.wordpress.com/
B-Decoder – Ambisonic Decoder is a 3rd order Ambisonic decoder.
Speaker Distance-Amplitude Compensation
The ability to specify the individual speaker distance from the center of the listening area, allows decoding for speaker array configurations where the speakers are not equally distanced from the center of the listening area. With the currently available decoder plug-ins, if a speaker is moved away from the speaker array perimeter, the user must adjust the volume slider of the moved speaker to compensate for the volume change caused by the distance moved.The plug-in allows the user to set the speaker’s distance from the center only, and the volume is automatically adjusted by the plug-in. If the volume of a speaker reaches the maximum, and its distance setting is further increased, the volume will not be increased. Instead the volume for all the other channels will be decreased accordingly. This prevents amplifiers and speakers from distorting, while maintaining an accurately volume balanced speaker array.
The distance sliders have a range of 0 to 10 meters with the default being 5. While the distance sliders affect the volume sliders, the volumes sliders do not affect the distance sliders.
Fully Adjustable Order-Balance Per Speaker
One way of implementing per-speaker order control, would be to add a slider for every speaker, with a range of zero to three. The slider would only be able to select values 0, 1, 2, or 3. If the user selected 2 for 2nd order then the variables for the third order processing of that channel would be set to zero. As a result processing would only include the channels of the zero, first, and second order of spherical harmonics.However a second approach, and the one which was implemented is to add four sliders for all individual speakers, that control the order balance of each speaker. The sliders control the percentage of the zeroth, first, second, and third base. The user can now control the orders on a per speaker basis.
Features:
- Fully adjustable per-speaker azimuth, elevation, distance, amplitude, order balance.
- Global distance, amplitude, and order weighting.
- 0th, 1st, 2nd, and 3rd order.
- 14 preset speaker array configurations.
- Up to 16 speakers.
- Speaker distance-amplitude compensation.
- 64 bit processing.
http://www.digenis.co.uk/
Features:
- 2 waveform oscillators.
- Arpeggiator.
- ADSR envelope.
- LFO.
- LP/BP/HP filters.
- Mono mode.
- Pitch wheel switching to joystick.
http://www.sanusart.com/
Azurite is a multi-voice chorus with a focus on rich sounds and versatile controls.
Unlike most choruses, Azurite allows for multiple simultaneous voices. Each of these voices has its own delay line that is modulated by a separate LFO. Adding multiple voices leads to a thicker, smoother, and less wobbly tone. It also makes vivid stereo spreading possible with a mono signal. The Voices control chooses how many voices the chorus uses: one, two, four, or eight.
Other main features:
- Stereo or mono operation.
- Colour control emulates vintage analog choruses.
- 2-band EQ.
- LFO tempo sync.
- Feedback control allows for flanger sounds.
- 27 built-in presets.
- Delay time from 0.2ms to 200ms.
- 7 LFO shapes: Sine, Triangle, Sawtooth, Ramp, Exponential, Inverse Exponential, and Random.
- Spread control for stereo widening of a mono signal.
- Control randomizer.
- Other controls: Depth, Speed, Wet Mix, Output, Separation, Dry Delay.
http://distorqueaudio.com
Features:
- 3 instruments.
- 9 drawbars.
- 6 different waveform shapes.
- Click.
- Percussion.
- Sustain.
- Split mode.
- Monophonic mode (perfect for bass sounds).
- Vibrato.
- Scalable pitch bend.
- Saturation/distortion/fuzz.
- Rotating speakers. Lower speaker can be switched between fixed and rotating.
https://sourceforge.net/projects/zr-3/
Features:
- 6 voice polyphonic.
- 3 oscillators (Saw, Sine, Tri, Pulse, Ramp, White Noise, Pink Noise).
- Resonant filter.
- 3 LFOs with various modulation options.
- Chorus and Distortion.
http://azeta66.altervista.org/
AXV5 is a 2 to 5 band cross-over plug-in for modular and semi-modular hosts such as Ableton Live, EnergyXT, Plogue Bidule, etc.
http://www.araldfx.com/
A simple piano? No, that’s boring. Get ready for some unique sounds:
- 1855 Broken and dissonant Pleyel Piano.
- About 30 Mo of samples (Recorded in .wav 48 kHz 16-bits).
- Slightly re-tuned to be able to play with other instruments but keeping dissonant.
{See video at top of page}
https://sites.google.com/site/digitalsystemic/
Autumn Tales is a sound library for Native Instruments FM8.
Autumn Tales features 25 patches that can fit a wide number of genres, covering sonic palette that goes from atmospheric pads to drones and arpeggiated leads.
A special care has been put in the morph control, so that each sound can deeply morphed and radically changed.http://www.sonusdept.com
