SoundField SurroundZone2

SoundField SurroundZone2 free stereo-imaging by TSL Products

SoundField SurroundZone2 is a free stereo imaging VST, Audio Unit, AAX plugin developed by TSL Products. Compatible OS(s): Windows, macOS.

SoundField SurroundZone2 unlocks the information captured from any of the SoundField microphone systems and gives control over a wide range of microphone parameters from a single intuitive user interface.

SurroundZone2 is available free of charge to give anyone the freedom to manipulate SoundField B-Format and A-Format files.

The plug-in rolls all the functionality of the original “Surround Zone” and “SPS200 Surround Zone” plug-ins into one. At the same time adding some exciting new controls such as “Snap Tilt” and “individual polar pattern control” for the surround modes.

The main focus throughout the development of this plug-in was ease of use across the most popular of all Digital Audio Workstations, both from a usage and a set-up perspective.

Supported Output Formats:

  • Stereo (Mono).
  • 5.0, 5.1, 6.0, 6.1, 7.0, 7.1.
  • B-Format.

Available Controls:

  • Input and Output trims.
  • Hi-Pass Input filter.
  • Mic Orientation: End-Fire and Invert.
  • Solo and Mutes for the Individual outputs.
  • Rotate, Snap Tilt (individual front and rear tilt) and Zoom.
  • Individual Width Controls.
  • Individual Polar Pattern Controls.

http://www.tslproducts.com/

SoundBytes Wusik Station 8

ZynAddSubFX free software-synthesizer by paulnasca 2

SoundBytes Wusik Station 8 is a free rompler VST plugin developed by SoundBytes Music Magazine. Compatible OS(s): Windows 64b, macOS.

SoundBytes Wusik Station 8 is a virtual instrument rompler from Wusik, addopted specially for SoundBytes music magazine. It comes with 1 GB of sound content and with a bonus additional 500 MB Acoustic collection available for our subscribers.

(Full version comes with exact the same engine, offernig around 16 GIGA of sound.)

http://soundbytesmag.net

Soundberg

Soundberg free sampler by kl.

Soundberg is a free sampler VST, Audio Unit plugin developed by kl.. Compatible OS(s): macOS.

Soundberg has a built in recorder that allows you to sample your own sounds with ease and with the modulation busses you can even do granular time and pitch shifting.

Features:

  • Built in sample recorder.
  • Drag & Drop sample loading.
  • 4 Sample zones per group.
  • Sample editor.
  • Keygroups and velocity zones.
  • 3 filter-types: LP, HP & BP with Q.
  • Filter and volume ADSR envelopes.
  • LFO with delay.
  • 2 modulation busses.
Made with Max/MSP for Pluggo

http://c100.cascom.se/

Sound Recovery

Sound Recovery free audio-restoration by Bitsonic

Sound Recovery is a free audio restoration Stand Alone, VST plugin developed by Bitsonic. Compatible OS(s): Windows, macOS.

The objective of Sound Recovery is to repair hard to understand and low quality soundtracks to a decent level. The software helps in cases when the mid-high frequency is completely missing. This can be audio recorded through a wall, or a conversation from the microphone’s dead space. In these cases simply using EQ can’t help. The software fixes the mid frequency by creating harmonics from the low frequency sign using distortion overdrive. The created harmonics help a lot to make the sounds more understandable. This function is most useful to forensic expert and audio restaurators.

The other function of the software is Multiband Denoiser, that erases the unwanted noise from (low-mid) and (mid-high) frequencies. This function has a more broad use. It for situations when using Equalizer negatively affects the noisy audio overall.

Functions:

  • Input Volume: Simple volume control, the maximum value uses the original value of the amplitude.
  • Split Freq: Selects the frequency range where the user would like to have the biggest difference during the change of the audio.
  • Recovery: Connected to Split Freq, this function works in the frequency range set in Split Freq. Recovery sends the sign into overdrive. Use only when significant repair is necessary, or when only higher frequency ranges need to be strengthened. (See: Low quality MP3, with no high frequency range.).
  • Enhancer: This function is similar to Recovery’s mechanism, but the user can set a narrow frequency range, to get more harmonics from. The other difference is that overdrive is made by a more specific algorithm.
  • Low pass: This simple low pass filter can be used when the high frequency noise is deemed too much.
  • Denoiser Low/High: Filters the noise from the low/high frequency range set by Split Freq.

Denoiser Low needs specific settings to function properly. For example, when the user would like to handle the low frequency range while Recovery is at maximum and Split Freq modifies too high of a range.

If the software is used only for noise filtering don’t use Recovery and Enhancer. The blue led knobs can be used to turn these functions on and off.

Using the Standalone version the user can load audio using the Load WAV function. For playing, looping, and audio exporting 3 function knobs can be used. The part of the audio to loop is shown by the bottom graphic display, marked by two vertical markerlines.

After the editing is done, the preset can be saved used the File knob.

The VST version works only with 32-bit DAW software, but with Bridges it can be used on a 64-bit system as well. Standalone can be used on 64-bit systems too, and with the help of Wine works on OS X systems as well.

3 WAV files are included as well, to show the way the 3 presets work.

{See video at top of page}

http://www.bitsonic.eu/

Sound Gadgets

Sound Gadgets free drum-machine by Reflekt Audio

Sound Gadgets is a free drum machine VST, VST3, Audio Unit plugin developed by Reflekt Audio. Compatible OS(s): Windows 64b, macOS.

https://reflektaudio.com

Soul Force!

Soul Force! free overdrive | saturation by ndc Plugs

Soul Force! is a free overdrive and saturation VST plugin developed by ndc Plugs. Compatible OS(s): Windows, macOS.

Soul Force! is basically a waveshaper, but the shape control can be modulated using the feedback control and source switch, which makes things a lot more interesting.

Source code is available.

http://www.niallmoody.com/ndcplugs

Sonus Modular

Sonus Modular free multi-fx | software-synthesizer | sampler | looper by Sonus Dept.

Sonus Modular is a free multi fx and software synthesizer and sampler and looper plugin VCV Rack developed by Sonus Dept.. Compatible OS(s): Windows, macOS.

Sonus Modular is a collection of modules for VCV Rack, an open source Eurorack modular synth emulator. It currently features the following modules:

  • Bitter: bit manipulator.
  • Bymidside: MS (mid-side) encoder.
  • Campione: live sampler.
  • Chainsaw: fat sawish oscillator.
  • Ctrl: customizable knob controller.
  • Deathcrush: distorsion and bitcrusher.
  • Harmony: chord generator.
  • Luppolo: simple looper.
  • Luppolo3: three track loop station.
  • Multimulti: a simple but handy double 2-in 8-out multiples.
  • Oktagon: quad-quad sine LFO/oscillator.
  • Osculum: a VCO capable of harmonic but unusual sounds.
  • Paramath: signals comparing and math utils.
  • Piconoise: an ultra compact white noise generator with 8 outputs.
  • Pusher: four button controller.
  • Ringo: ring modulator.
  • Scramblase: triple quadruple waveshaper.
  • Twoff: double CV static offset.
  • Yabp: blank panel.

http://www.sonusdept.com

Sonik Synth FREE

Sonik Synth FREE free rompler by IK Multimedia

Sonik Synth FREE is a free rompler VST, Audio Unit, DirectX plugin developed by IK Multimedia. Compatible OS(s): Windows, macOS.

Sonik Synth 2 FREE is a fully functioning, but sound set limited, version of Sonik Synth 2.

Sonik Synth 2 offers a unique, state-of-the-art software design with many special features and sounds. 32-bit synth engine including IK’s multisample playback and exclusive harmonic STRETCH synthesis. 5 global combi effects and 5 insert effects per part for a total of 85 different effects slots.

More than 30 DSP effects to choose from, developed using sophisticated analog modeling cover popular effect needs within this amazing synth-workstation. From Classic Analog Modeled Filters to Vintage Phasers, Flangers, BPM Sync Delays, Choruses, Tube Modeled Pre Amps, EQs, Compressors, Distortions and many more fully automatable effects, Sonik Synth 2 has everything you’ll need to shape your sounds like never before.

http://www.ikmultimedia.com/

SONIC VOL

SONIC VOL free multi-fx | chorus | delay | phaser | lfo | gate by SONIC EMBLEM

SONIC VOL is a free multi fx and chorus and delay and phaser and lfo and gate VST, Audio Unit, RTAS plugin developed by SONIC EMBLEM. Compatible OS(s): Windows, macOS.

Features:

  • High Precision LFO for Volume.
  • 6 Types Waveform (±SAW ±TRI ±SQU).
  • 1Bar~127Beat LFO Rate (Synchronize with BPM).
  • LFO Phase is retriggered when change from Rate0 (also Host Transport Start).
  • Click Noise Reduction.
  • Support Automation.
  • UI for Touch Device.

{See video at top of page}

Made with Max/MSP for Pluggo

https://sites.google.com/site/sonicemblemstudio

Sonic Visualiser

Sonic Visualiser free spectrum-analyzer by Centre for Digital Music at Queen Mary

Sonic Visualiser is a free spectrum analyzer plugin developed by Centre for Digital Music at Queen Mary, University of London. Compatible OS(s): Windows 64b, macOS, Linux.

Sonic Visualiser is an application for viewing and analysing the contents of music audio files. The aim of Sonic Visualiser is to be the first program you reach for when want to study a musical recording rather than simply listen to it.

As well as a number of features designed to make exploring audio data as revealing as possible, Sonic Visualiser also has powerful annotation capabilities to help describe what you find, and the ability to run automated annotation and analysis plugins.

Features include sophisticated spectrogram views; multi-resolution waveform and data displays; manual annotation of time points and curves; measurement capabilities from spectrogram and spectrum; playback at any speed; looping and playback of discontiguous selections; ability to apply standard audio effects and compare the results with their inputs; and support for onset detection, beat tracking, structural segmentation, key estimation and many other automated feature extraction algorithms via Vamp audio analysis plugins.

Sonic Visualiser contains features for the following:

  • Load audio files in WAV, Ogg and MP3 formats, and view their waveforms.
  • Look at audio visualisations such as spectrogram views, with interactive adjustment of display parameters.
  • Annotate audio data by adding labelled time points and defining segments, point values and curves.
  • Overlay annotations on top of one another with aligned scales, and overlay annotations on top of waveform or spectrogram views.
  • View the same data at multiple time resolutions simultaneously (for close-up and overview).
  • Run feature-extraction plugins to calculate annotations automatically, using algorithms such as beat trackers, pitch detectors and so on.
  • Import annotation layers from various text file formats.
  • Import note data from MIDI files, view it alongside other frequency scales, and play it with the original audio.
  • Play back the audio plus synthesised annotations, taking care to synchronise playback with display.
  • Select areas of interest, optionally snapping to nearby feature locations, and audition individual and comparative selections in seamless loops.
  • Time-stretch playback, slowing right down or speeding up to a tiny fraction or huge multiple of the original speed while retaining a synchronised display.
  • Export audio regions and annotation layers to external files.

The design goals for Sonic Visualiser are:

  • To provide the best available core waveform and spectrogram audio visualisations for use with substantial files of music audio data.
  • To facilitate ready comparisons between different kinds of data, for example by making it easy to overlay one set of data on another, or display the same data in more than one way at the same time.
  • To be straightforward. The user interface should be simpler to learn and to explain than the internal data structures. In this respect, Sonic Visualiser aims to resemble a consumer audio application.
  • To be responsive, slick, and enjoyable. Even if you have to wait for your results to be calculated, you should be able to do something else with the audio data while you wait. Sonic Visualiser is pervasively multithreaded, loves multiprocessor and multicore systems, and can make good use of fast processors with plenty of memory.
  • To handle large data sets. The work Sonic Visualiser does is intrinsically processor-hungry and (often) memory-hungry, but the aim is to allow you to work with long audio files on machines with modest CPU and memory where reasonable. (Disk space is another matter. Sonic Visualiser eats that.).

http://c4dm.eecs.qmul.ac.uk/