80s EP FM Free

80s EP FM Free free soundbank by Tangent Edge Instruments

80s EP FM Free virtual instrument is a free keyboard sound bank for Kontakt, by Tangent Edge Instruments.

The 80s EPs are virtual versions of 4 iconic 80s EP sounds from the Yamaha DX7 Mark II, each counting two times 1144 24-bit/48kHz samples for the Pro versions. 88 keys sampled in 12 velocity layers. The 140 versions have 140 samples. The 80s EP FM 140 is Free!
There are three more of them: 80s EP Bright, Classic, and Warm.

No software emulation beats the expressiveness and bite of the real thing. I played around two thousand EP presets, customized 32 of my favourites on my TX802/DX7II and then sampled 4 like all the virtual Wurlitzers and Rhodes out there: extremely detailed and programmed to behave exactly like the original.

“FM” is based on the popular FM Roads preset.

In the demo below you can hear the same MIDI file rendered by by TX802 module, the Pro versions Pure and Coloured, the 140 version and finally FM8 using the same preset.
Check out the demo of the Classic Pro too so you can hear what the instrument is capable of, it has the same engine.

Requires the full version of Kontakt 3.5 or higher. The 80s EPs will only work for 30 minutes in the free Kontakt Player.

http://www.tangentedgeinstruments.com

8-Bit Shaper

8-Bit Shaper free distortion by Xfer Records

8-Bit Shaper is a free distortion VST, Audio Unit plugin developed by Xfer Records. Compatible OS(s): Windows 64b, macOS.

8-Bit Shaper takes your audio single and reduces it to 8-bits for a waveshaper stage. Optional pre and post filtering allow for further coloration of the signal. Wet/Dry control and free-drawing on the graph allow you to control the amount of mangling.

Try it on drumloops, leads, basses and more.

http://www.xferrecords.com/

7Q

7Q free eq by Manda Audio

7Q is a free equalizer VST, Audio Unit, AAX plugin developed by Manda Audio. Compatible OS(s): Windows, macOS.

7Q was designed as a simple, but effective 64-bit alternative to the graphical Classic EQ with musically predefined bands and Q values. With the integrated high pass and low pass filters, you can tidy up your mix and make it more transparent. Use it either as your main EQ for an instrument or vocal track, or simply for a rough clean up before sending your signal into a compressor or adding other effects.

http://www.powerdrumkit.com

4U+ DynamicTiltEQ

ZynAddSubFX free software-synthesizer by paulnasca 3

4U+ DynamicTiltEQ is a free equalizer VST, VST3, Audio Unit, RTAS, AAX plugin developed by HOFA-Plugins. Compatible OS(s): Windows 64b, macOS.

HOFA 4U+ DynamicTiltEQ is the only available freeware Tilt EQ. It can do everything the legendary analogue models could:
Use just one knob for the perfect balancing of low and high frequencies on the highest audio level.

This alone is a fantastic feature, but (of course) was not enough to suit our idea. We brainstormed about the setup of the best Tilt EQ of all times and came up with a list that leaves no wish unfulfilled. The freeware includes:

  • gain/cut up to 24 dB.
  • variable tilt width for transparent adjustments as well as musical sound shaping.
  • splittable bass and treble tilt.
  • low and highcut filter (6 & 12 dB/octave).
  • individual routing for stereo, mid, side left and right processing.
  • up to 32x oversampling.
  • support for Mac and PC, 32- and 64-bit DAWs.

It’s extremely rewarding to activate the dynamics for the low and high range and the integrated analyzer for very little money. In combination with parallel processing and a dry/wet control this makes for fascinating creative possibilities.

Despite all these extras, 4U+ DynamicTiltEQ is a simple, self-explaining sound shaper – so just install it, start to work and enjoy the good sound.

HOFA 4U+ DynamicTiltEQ – The worldwide first dynamic Tilt EQ.

HOFA 4U+ DynamicTiltEQ provides for:

  • sound shaping on the highest level.
  • balanced sounds.
  • less waste of time by its intuitive workflow.
  • analogue feel of handling and sound.
  • new creative means of expression.

https://www.hofa-plugins.de

4Front Rhode

4Front Rhode free rompler by 4Front Technologies

4Front Rhode is a free rompler VST, Audio Unit, RTAS plugin developed by 4Front Technologies. Compatible OS(s): Windows, macOS.

4Front Rhode is a CPU-lightweight vintage Rhodes-type piano module with a gentle overdrive. This module reproduces the classic sound similar to RSP73 pianos. The sound generation is not based upon samples, thus there are 127 continuous layers provided with a vintage rhodes smooth overdrive.

http://www.4front-tech.com/

2WarpDelay

2WarpDelay free delay | echo by Mutagene

2WarpDelay is a free delay and echo VST, Audio Unit plugin developed by Mutagene. Compatible OS(s): Windows 64b, macOS.

2WarpDelay pairs two warped-lattice IIR filters with a pair of delay lines and a bitmap which it scans to extract filter coefficients.

A stereo signal is fed through two delay lines followed by a warped IIR lattice filter. The lattice filter can be of any order from 1 to 80 and uses reflection coefficients extracted from an image. This output is fed through a saturation stage and a ducking / limiting stage before being fed back, again, into the delay lines. The lattice filter is warped, and by adjusting the warping parameter its frequency response can be easily adjusted.

Resonance controls the distance between spectral peaks and spectral valleys in the filter transfer function, and cutoff controls the cutoff of a first-order low pass filter that follows the lattice filter.

http://dsp.mutagene.net/

2RuleFilter

2RuleFilter free filter by 2Rule

2RuleFilter is a free filter VST plugin developed by 2Rule. Compatible OS(s): Windows, macOS.

2RuleFilter is a self-resonant moog type filter that allows the filter cut-off frequency to be controlled manually, by LFO, or by an envelope follower. It has a interesting feature called “scrambler” that plays filtered signal randomly depending on the selected beat. The “mix” knob mixes wet and dry signals, The “volume” knob is for setting the output volume level. The”Bit Crusher” produces hard sound. Using its scramble feature you can maintain the rhythmic, choppy, buffered and tempo sync output.

{See video at top of page}

Features:

  • High Pass, Low Pass, Band Pass filter.
  • Modulation of filter cut-off frequency by LFO (tempo-sync), manually or envelope follower (reversable).
  • Bit crusher (16-bit to 1 bit).
  • Scrambler that divides one measure to different time interval and plays them randomly.
  • Mix balance in between dry (input signal) and wet (filtered and bit crushed).
  • Sensitivity that allows the filter cut-off frequency be changed from roughly to smoothly. This effect is the same of parameter smoothing.

https://akyuz5.wixsite.com/mysite

2S Equalizer

2S Equalizer free eq by 2nd Sense Audio

2S Equalizer is a free equalizer VST, Audio Unit, AAX plugin developed by 2nd Sense Audio. Compatible OS(s): Windows, macOS.

2S Equalizer is a parametric EQ featuring a straightforward user interface. We believe everyone can use it without learning. And it is free.

https://www.2ndsenseaudio.com/

272 Merry Orks

ZynAddSubFX free software-synthesizer by paulnasca 2

272 Merry Orks virtual instrument is a free sound bank for Sforzando, by Karoryfer.

Free sample library of female death metal vocals.

Key features:

  • All vowels and dipthongs used in the English language with three round robins.
  • All English consonants with four round robins.
  • Nine miscellaneous growls (such as “hey” or “argh) with three round robins.
  • Numbers from zero through ten.
  • Eight breath samples.
  • Seventy pre-drop samples recorded at 128 BPM.
  • Three sfz mappings.
  • 43 MB total size.

The below demo uses one of the pre-drop samples, then the same phrase assembled from the phoneme samples.

https://soundcloud.com/karoryfersamples/272-merry-orks-demo-in-1000-years

http://www.karoryfer.com/karoryfer-samples

2BusControl

2BusControl free metering by MAAT

2BusControl is a free metering VST, VST3, Audio Unit, AAX plugin developed by MAAT. Compatible OS(s): Windows 64b, macOS.

As an introduction to everyone in the KVR community, we’re giving away this free and rather useful plug–in. Available for all major plug-in formats, including VST2/VST3 and AAX for MacOS and Windows plus AU for Mac OS, 2BusControl offers five essential options for specialized monitoring modes plus highly responsive and user-friendly metering for left/right balance and correlation.

Solo is available post-metering with a single button push. Traditional left/right soloing (as phantom center) can be chosen, or the equally useful MONO/DIFF (erence) or M/S (Mid/Side) rendering of the soloed signal. In addition, the stereo perspective can be swapped or flipped with the left and right channels changing places. Each solo control is a single button, allowing you to check placement and amplitude easily for all aspects of your mix.

Usable metering is another essential for any engineer, and options are equally practical, with stereo balance and inter-channel correlation occupying the upper half of the user interface. Unlike prior products that provide similar metering functions, 2BusControl’s measurement and display algorithms adhere to our guiding philosophy of enhancing your workflow and improving ergonomics through careful attention to the way you actually work. Ballistics are meticulously tuned to achieve the best match between the aural impression you hear, and the optical rendering by the meters.

All of 2BusControl’s functionality is wrapped in an information-rich yet visually unobtrusive user interface that occupies only a small slice of screen real estate. Likewise, the plug-in is “light weight” demanding a minimum of CPU resources so it won’t slow down your host.

Product Features:

Metering:

  • Left/Right Balance.
  • Left/Right Correlation.

Soloing:

  • Left/Right.
  • MONO/DIFF (Mid/Side).

Channel Swap:

  • Left/Right Flip.

http://maat.digital/