Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
This bundle contains all previously released plugins by Sleepy-Time Records. This includes MonoChannel, StereoChannel, Transient, DualPanner, Polarity, and Crosstalk v2.
https://sleepytimedsp.tumblr.com/
Fragmental is a complex multi-fx plugin incorporating a delay, granulator, three phase vocoder effects, a reversinator, and three types of modulation source. It incorporates a very flexible routing scheme capable of serial and parallel effects routings, and a new kind of modulation routing based on a kind of pie chart representation.
This plugin was developed in conjunction with KVR member, shamann.
The code for the phase vocoder effects comes from the PVOC plugins (Trans, Exag, Accum) . It should be noted that the presence of the phase vocoder effects mean the plugin has a constant delay of 7680 samples, although PDC-capable hosts will compensate for this.
http://www.niallmoody.com/ndcplugs
Flame is a matrix-based multi-effect. It does not have a set configuration, allowing you to freely route the audio between the different modules however you see fit. This flexibility allows you to create a huge range of sounds and effects.
http://rekkerd.org/martin-eastwood-audio-free-plugins/
The Collective 8 Audio Unit Bundle consists of three Audio Units: F8-V2, Mod8 and Res8. All three share a similar amplitude modulation sequence configuration. The audio stream is copied into 8 identical streams and an amplitude modulation pattern can be applied to each stream. The amplitude modulation patterns can be drawn to any shape, with an-easy-to use editing environment that automatically appears when hovering over the patterns with a mouse. Each stream also has filters or effects applied to it individually. The streams are then mixed back together.
The plug-ins:
- F8-V2 has LFOs, which are applied to highpass, bandpass or lowpass filters.
- Res8 has a choice of a driven, nonlinear, multi-stage filter or formant filters that can be independently applied to each audio stream.
- Mod8 has a range of modulation effects like vibrato and ring modulation. It also has echo, reverb, sub-octave, and pitch shifting.
The result is up to 8 different effects running all at the same time, each with its own settings and amplitude sequences. This layering gives unlimited options to create incredibly interesting effects, from intricate and wild effects, to rich, textured reverb, echo, chorus-type effects. The Collective 8 Audio Units come with hundreds of presets. Amplitude modulation patterns can be copied and pasted within each AU or between them.
http://www.musicunfolding.com/
Extremist is a multi-effect plug-in designed for use with guitars – its main purpose is for distorting a guitar signal to create an “extremely heavy sound”. This effect is not a tube amplifier simulator, however some methods of altering the signal are similar to tube amplification characteristics.
Extremist works in stereo, without any latency, and includes a 15-band stereo equalizer. It uses SSE instructions for Pentium II or newer CPUs.
Controls:
- Drive, Dry, Wet, Volume: knobs for regulating amplification & mixing signals.
- Feedback: level of feedback signal.
- Clip: clipping level.
- Reverb: stereo reverb effect, adjustable up to delay.
- Mod Boost: mid-tones amplification.
- Eq Q: width of each frequency band amplification of equalizer.
- Pre HPF: filtering low frequencies of effect input.
- Post LPF: filtering of high frequencies of effect output.
- Noise gate.
- Amp curve: amplification characteristic.
- Lock bars: steering of equalizer in mono/stereo.
- Post gating: noise gate applied before/after effect.
- Smoothing: signal smoothing (hiss reduction).
http://habib.webhost.pl/
A set of modern and powerful spectral processing modules opening to SynthEdit users the doors to STFT (Short Term Fourier Transform) and making of it an even more valuable platform. From pitch shifting to envelope extraction, from sound synthesis to convolution, from vocoding to voice manipulation… just check the included example projects to have a broad idea of the almost unlimited possibilities offered by this modular spectral processing framework. Everything written in highly optimized C++ code. Underlying technology entirely developed by the author based on no one else’s work.
Please browse www.elenadomain.it/listing/SE to download the latest version of Elena Spectral Modules.
http://www.elenadomain.it/listing/SE
DtBlkFx is a Fast-Fourier-Transform (FFT) spectral processing plug-in.
Features:
Precision parametric equalizing with sharp-roll off:
- Set the frequencies so accurately that you can adjust individual harmonics of a sound.
- Frequency resolutions of up to 0.7 Hz.
Harmonic based (or comb) filtering:
- Set a fundamental frequency and adjust the level of it and its harmonics – you can even remove the pitched component of a voice.
- Active harmonic tracking – let DtBlkFx automatically track a sound and adjust the level of its harmonics.
Various types of noise control:
- Change the “contrast” between loud and soft frequency components.
- Adjust only those frequencies below or above a particular threshold.
- Clip frequencies above a particular threshold.
- Sound smearing (phase randomizing).
Frequency shifting:
- Harmonic shifting by a fixed number of notes.
- Non-harmonic shifting by a fixed frequency.
- Active harmonic repitch – the content of your sound is monitored and re-pitched to a destination note.
Vocoding:
- Standard (frequency enveloping) – make your trumpet rap, string section sing or synthesizer talk.
- Harmonic based – harmonics in one channel are power-matched to those in the other (or some predefined waveforms) for a new vocoding sound.
Frequency masking:
- A harmonic or threshold mask may be set for any effect (apart from vocoding) – for example only shift frequencies that are below the threshold.
Realtime spectrogram (waterfall) display of input and output sounds:
- See what frequency components are in your sound and exactly what you’ve done.
- Use your mouse to see the note & frequency under the pointer.
You can select up to 4 of the above effects to be run in series – combining the effects in this way allows you to make completely new and surprising sounds.
DtBlkFx is freely distributable and is covered by the terms of the GNU licensing agreement. Source code is included.
http://www.rekkerd.org/dtblkfx/
Drift is a multi-effects processor based on two independent Lorenz chaos oscillators. These systems are used by scientists to model convection in liquids and gases: they produce chaotically fluctuating, never-repeating signals that are mutually correlated. Drift uses one Lorenz oscillator to apply two-dimensional modulation onto an effect unit with filters, phasers and phasers – and another such oscillator is applied onto output level and stereo pan. With this, Drift is able to give any sound the dynamic characteristics of wind gusts, air turbulence, ocean waves or water bubbles.
All of Drift‘s functionality is neatly presented by an intuitive interface wholly built with color-coded graphics. It features graphic representations of the two Lorenz oscillators as well as subtle animations for all controls, for a pleasant, natural user experience. Together with careful parameter calibration, this makes Drift an always enjoyable, yet very musical and productive tool.
Sound engine:
- Two Lorenz chaos oscillators with adjustable speed and output curve shaping.
- Multi-effect unit featuring 15 different filter, phaser and flanger algorithms.
- Four modulation destinations: two effect parameters, output level, and stereo pan.
Interface:
- Real-time graphics for Lorenz chaos oscillators.
- Color-coded controls with lightly animated transitions.
- Fully hardware-accelerated rendering with support for Retina screen resolution.
Compatibility:
- Works with any application that supports Audio Unit effect plugins.
- Supports OS X 10.6 or later running on 32 or 64-bit Intel Macs.
http://www.sinevib.es/
Features:
- 12 delay lines version of Hexaline.
- 12 stereo delays with cross-feedback.
- Parallel or serial modes.
- Up to +/- 100% feedback for ambient special effects.
- Available for free for registered users of EP-Station, Angelina and Rainbow.
http://www.bigtickaudio.com/
DiTone splits your input signal into two separate streams. An independent effect is applied to each stream. Then the dry input signal can be mixed into each stream independently. One stream is lowpass filtered and the other is highpass filtered. The two filters are designed to overlap in a nice musical fashion. Finally, the two streams are mixed back together with independent volume controls.
DiTone has a variety of effects available including tremolo, vibrato, panning, chorus, and flanger. Altogether, you can choose between twelve different types of effects for each stream and set the parameters independently for each. This gives you a huge array of possible sounds from which you can create interesting and unique modulation effects.
http://www.musicunfolding.com/
