Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
Features:
- High Precision LFO for Mid Side.
- 6 Types Waveform (±SAW ±TRI ±SQU).
- 4Bar~32*Beat LFO Rate (Synchronize with BPM).
- LFO Phase is retriggered when change from Rate0 (also Host Transport Start).
- Click Noise Reduction.
- Support Automation.
- UI for Touch Device.
{See video at top of page}
https://sites.google.com/site/sonicemblemstudio
Features:
- Realtime Pitch Bend with LFO.
- ±12 Pitch Range.
- 6 Types Waveform (±SAW ±TRI ±SQU).
- 16Bar~8*Beat LFO Rate (Synchronize with BPM).
- LFO Phase is retriggered when change from Rate0 (also Host Transport Start).
- Click Noise Reduction.
- Support Automation.
- UI for Touch Device.
{See video at top of page}
https://sites.google.com/site/sonicemblemstudio
SonEQ is a digital equalizer that takes parts from some vintage gear and combines them. SonEQ has 3 bands, bass, middle and treble. Also, SonEQ has a pre-amp section.
Features:
- 3 band Equalizer, Low, Mid, High.
- 2 Musical Filters, High-Pass Low-Pass.
- Preamp stage with bass booster.
- 64-bit floating point precision.
- Up to 192kHz sample rates supported.
- Mac Intel AU/VST, Windows 32 VST.
http://www.sonimus.com/
< Sequencer Control >
Step Number > 1Step ~ 4Step.
Step Direction > Up, Down, Updn, Rndm.
Trigger Mode > Manual ~ Auto.
Quantize Cycle > 1Bar ~ 128Beat.
Step Length > x1Rate ~ x48Rate *-value=accelerate action.
Step Speed > x1Rate ~ x48Rate *-value=invert action.
< Waveform Control >
SAW > Saw-100% ~ Tri ~ Saw+100%.
SQU > S&H+100% ~ Square+100%.
SIN > Sine-100% ~ Sine+100%.
SCH > Sidechain -100% ~ 100%.
SPD > LFO Speed 1Bar ~ 48Beat.
EXT > Extension Value -100% ~ 100%.
LVL > Level Value 0% ~ ∞%.
SCL > Scale Value 0% ~ 100% *-value=with delay action.
*Mouse Right Click=Reset Value.
{See video at top of page}
https://sites.google.com/site/sonicemblemstudio
Features
General:
- Portamento with Automatic Setting or user set amount.
- 5 voice Polyphony.
- Monophonic Mode.
- Legato Mode.
LFO Section:
- Global ON/OFF.
- 6 Waveforms.
- Adjustable Rate and Attenuation.
- Pitch.
- FM Modulation Send.
- PW Modulation Send.
- Cut off amount.
Amp Section:
- Attenuation.
- Attack, Hold, Decay, Sustain and Release (AHDSR Envelope) controls.
- Pulse Width Modulation Amount.
- FM Modulation Amount.
Oscillator Section:
- Two Oscillators.
- Osc. 1: 5 waveforms.
- Osc. 2: 7 waveforms.
- Mix control between Osc. 1 and Osc. 2.
- Pulse Width Modulation Amount.
- FM Modulation Amount.
- Osc. Mix.
Filter Section:
- Filter Amount.
- Attack, Decay, and Sustain controls.
- Cutoff Frequency.
- Resonance Amount.
- Drive Amount.
- Mod Wheel Control Amount.
- Velocity Control Amount.
Arpeggiator Section:
- Synchronize to Host.
- 1 to 4 Octave Range.
- Echo FX On/Off.
- 7 Mode Settings.
- 7 Pattern Settings.
PSP VintageMeter provides professional VU and PPM metering for mono and stereo tracks. All parameters like integration times and reference levels are widely adjustable to make this free plug-in suitable for any application. This plugin is used by top electronic music producers such as Fred Again or Skrillex
http://www.pspaudioware.com/
PSP PianoVerb reproduces a special kind of reverberation originally provided by piano strings. It generates reverberation using twelve string operators with adjustable damping and decay time. Each of them is tuned to a particular note starting from A(55Hz) to a G#(103.8Hz).
The PSP PianoVerb string system can be transposed in the range of +-24 semitones, tuned within a range of +-100 cents and be detuned as well. Transposing to lower octaves produces a bigger and less resonant sound similar to traditional reverbs, while in turn transposing to higher octaves produces a very bright harp-like effect.
http://www.pspaudioware.com/
PhreePhuzz is a saturation plugin pure and simple. Although the controls are very simple to use, PhreePhuzz utilizes many underlying technologies used to create LVC-Audio’s PreAMPed, Toned, TonedPLUS and HotPhuzz plugins. PhreePhuzz has six distinct saturation settings. Each of these settings utilizes a distinctly-tuned multiband saturation algorithm. All internal processing occurs using 4x oversampling to reduce the aliasing effects of saturation.
PhreePhuzz can be pushed into overt distortion; however, it excels at more gentle saturation effects. Each of the four saturation settings has emphasis on different frequency components. PhreePhuzz can be used to give a track low-end saturation without dulling the high frequencies, or it can be used to give a shimmering high-end sparkle without muddying the bass.
System Requirements and Specifications:
- Windows: VST, VST3, RTAS, and AAX plugin formats. PhreePhuzz requires Windows XP SP 3 or newer with a processor that supports SSE2 (AMD or Intel processor from around 2004 or later). An iLok device is required to use the AAX format.
- OS X: AU, VST, VST3, RTAS, and AAX plugin formats. PhreePhuzz requires OS X 10.5 or later, and an Intel processor. An iLok device is required to use the AAX format.
PhreePhuzz
PhreePhuzz can be downloaded at LVC-Audio.
http://www.lvcaudio.com
Features:
- Multi-stage analog-style phaser effect.
- Up to 32 phasing stages.
- Real time MIDI control with advanced settings (MIDI channel and CC numbers, with complete response curve control) and MIDI learn.
- Native DSP code for optimal performance.
- Skinnable user interface.
- Smooth Update: silent (zipper-free) parameters update.
- Full automation support (all parameters can be automated, with smooth and continuous update).
- Any sample rate supported.
http://www.bluecataudio.com/
Ozone Imager is a free stereo imaging plug-in for your DAW or NLE.
Born from Ozone’s Imaging technology, Ozone Imager can narrow or widen your stereo image with “simple controls, stunning visuals, and incredible sound”.
http://www.izotope.com/