Download Category: Filter

Noisebud Filter consists of 4 filters (or 16, depending on how you look upon it), they are switchable between Lo pass, hi pass, band pass and band reject filter.

The signals from the four filters are wired in a parallel chain. Every filter can be controlled by three different LFOs where one is tempo-synced; one normal and one extremely slow (a sLoFO).

The LFO sections also have something Noisebud call VariFO. It adds another movement to the LFO and makes it less predictable.

Every filter has an invert button so that you can silence frequencies that collide during heavy LFO movements, this and the VariFO is probably what make Noisebud filter special.

http://www.noisebud.se

Naive LPF is a resonant low-pass filter with envelope follower. It has been developed to closely model the way some real world analog circuits work, as opposed to some other techniques which, while well adapted to the math processing power of a computer, just don’t seem to render the same organic feel. Not to say that those techniques aren’t just as valid, but Admiral Quality was aiming for a vintage, analog feel with Naive LPF.

NOTE: Its creation is primarily as a test-bed for a full soft-synth Admiral Quality have planned.

Features:

• Cutoff Frequency: Continually variable, from far above the sample rate of your host down to 0 Hz.
• 4 Stages: Selecting the number of Stages adjusts the cutoff slope of the filter. More stages make a steeper slope.
• Resonance: Enhances frequencies near the cutoff by feeding the inverted output signal back into the input. The resonance can be set high enough that this filter will enter self-oscillation and produce very loud signals, even without any input signal present.
• Envelope Follower: Vary the cutoff frequency in response to the dynamics of the input signal, creating “auto-wah” type effects. With Attack and Release controls.
• HPF Mode: Subtracts the low-pass filter’s output from the original input, providing a high-pass filter effect.
• Output Saturation: Reduce excessive peaks back below 0 dB.
• 6 input / 6 output channels. Each channel has its own independent filter with envelope follower.

http://www.admiralquality.com/

Mutine is an emulation of the Mutator effect. It has two envelope followers and two LFOs that trigger volume or cutoff. The envelope followers can be set to follow left channel, right channel or both. The effect can also be set to apply on left, right or both channels.

There are 2 versions: one with a vintage GUI, one with a more user friendly GUI.

http://www.mokafix.com/

Murmur allows up to 8-step sequencing of two independent, parallel multimode filters. At each sequence step, both the cutoff frequency and resonance value of each filter can be set. The sequencer automatically synchronizes to the tempo of the VST host.

The Steps and Size controls effectively set the time signature of the cycle: Div of “4th” and Steps of 3 are 3/4 time, etc. A bank of indicator lights shows the current sequence step.

Features:

• 2 variable-cutoff resonant filters offering 12dB/octave lowpass, highpass, bandpass, and notch modes as well as a 24dB/octave lowpass mode.
• Syncs to host tempo, sequencing up to 8 steps of durations from 64th note to double whole note.
• Full control of filter frequency and resonance for each filter and sequence step.
• Compact and straightforward custom GUI.

http://www.tinygod.com/