Free Filter Plugins & Apps

Ranger

Ranger is a free filter and saturation VST plugin developed by Ourafilmes. Compatible OS(s): Windows.

Ranger is a very simple effect that allows you to remove wanted frequencies and saturate the resulting signal.

It features one low cut filter and one high cut filter, both up to 30 dB per octave and with a bypass switch. There’s also a master bypass switch and input and output level meters.

This effect has full automation.

This is a free plugin but, to download, you must be a fan of the Ourafilmes Facebook page as it is included in the Ourafilmes Facebook Free Pack.

http://www.ourafilmes.com/

Radio Junk

Radio Junk is a free distortion and filter VST plugin developed by Cupwise FX. Compatible OS(s): Windows.

It’s a small but unique suite of effects made from 2 junky old radios, one solid-state (from the 70’s) and the other a tube radio (from the 50’s). The radios were ‘sampled’ using technology similar but superior to the common convolution impulses out there. It’s called Nebula, and it can capture the sound of what’s being sampled at different dynamic levels, and it can also capture some of the distortion, unlike standard convolution.

These effects use a variant of the Nebula tech called ‘Acqua’, which just means that these are stand-alone effects, and you don’t need Nebula to load them (it’s built in, basically). The radios were sampled in extreme ways to get some nasty lo-fi effects. Since these were made with the Nebula technology, they will sound different from other plug-ins out there. You should grab them and give them a try! They’re free!

http://www.cupwise.com/cup/

qWarpFilter

qWarpFilter is a free filter VST plugin developed by Mutagene. Compatible OS(s): Windows.

qWarpFilter allows the user to perform a warped LP analysis of the input signal for each of four independent filter banks, where after the user can warp between all four filters using the XY touchpad control or use the ‘filter warp’ slider to change the warping in the filtering stage.

The results tend towards bellish sounds or weird sleeping sounds reminiscent of the EMU Morpheus’ filters.

http://dsp.mutagene.net/

Pipeline Pressure Control

Pipeline Pressure Control is a free filter plugin for Reason developed by Turn2on. Compatible OS(s): .

Take full control of the water network right from the Reason rack. Adjust the pressure in the pipes, the flow rate, and even eavesdrop on what is happening on the other side of the pipe or inside it.

Product details

By passing a signal through a pipe, you simulate analog filtering. When a signal passes through a pipe, harmonics saturate according to the selected pipe type.

With this effect is available:
– 22 types of pipes
– pressure monitoring by means of a valve
– visual control
– correction of the signal level at the pipeline inlet and outlet.

The device is a means of monitoring the signal in the underground communication environment. This is one of the most recent techniques for check mixing control in our days.

https://turn2on.com

PhasicMultiFX

PhasicMultiFX is a free multi fx and delay and echo and filter VST plugin developed by Phasic. Compatible OS(s): Windows.

PhasicMultiFX provides multiple, fully automated effects, in one plug-in. The order in which the effects are chained can be altered and each effect can be enabled/disabled.

The effects include:

24dB Low-Pass Q-Shaping Filter

24dB High-Pass Q-Shaping Filter

Flanger

WaveShaper

Delay

http://www.phasic.co.uk/

pfilter

pfilter is a free filter and gate VST plugin developed by de la Mancha. Compatible OS(s): Windows.

pfilter creates a steppy, gated effect, but using filter cut-off instead of volume to give a wider range of possibilities. It uses a variable state filter, triggered between 2 adjustable cut-off values by a tempo-sync’d probability-based step sequencer. An LFO can modulate the filter when triggered and trigger pulse length, attack and release can shape the sound

Features:

Tempo-sync step sequencer, with 2 to 32 steps over a sequence length of 2 to 32 beats.

Can be programmed or random, by setting the probability of each step from 0-100%.

Seeded randomisation for repeatable loops up to 100 beats long.

Resonant variable filter, LP, HP, BP and notch.

Filter triggered between upper and lower cut-off values, in either direction.

Tempo sync LFO, with 6 waveforms and settings from 1/16 beat to 96 beats.

Adjustable pulse length, attack and decay for shaping the modulation.

Random swing for step sequencer.

Wet/dry mix control.

MIDI CC and MIDI learn.

https://delamanchavst.wordpress.com

Pedals

Pedals is a free multi fx and overdrive and saturation and amp simulator and delay and echo and flanger and phaser and pitch shifter and reverb and eq and filter VST plugin developed by ToneBytes. Compatible OS(s): Windows.

Pedals is a VST effect plug-in designed for processing electric guitar and bass. It is also possible to process other audio sources for a variety of artistic techniques.

The Pedals GUI simulates real devices for sound processing: guitar pedals, amplifiers, speakers, etc. There are a total of 20 models of pedals, 2 amps, 7 speakers models and 3 rack units. These devices are not a copy of the real-life models, each with their own sound, but their working principles are identical.

The user can select a combination of effects and can even create extra mood by choosing floor material under the pedals: house parquet, metal garage floor or studio carpet.

There is a built-in preset manager to save the settings and access them or share them with other users. VST automation and full MIDI Learning are supported.

http://tonebytes.com/

PeakingFilterBanks

PeakingFilterBanks is a free filter VST plugin developed by David Ross. Compatible OS(s): Windows.

PeakingFilterBanks is a bank of Peaking Filters, also known as Resonators. In total there are 3 separate banks of Peaking Filters – a master bank and two sub banks, each bank consisting of 12 Peaking filters, thus providing a total of 36 Peaking filters.

Features:

3 banks of 12 Peaking Filters.

Master Tune and Filter Width control.

Fine tune +/- 12 semitones for each child bank.

Adjustable boost 0-6dB for each filter bank.

Pre / Post Lowpass and Highpass filters.

Dry Wet control.

Numeric displays.

http://rekkerd.org/david-ross-vst-plug-ins/

PAUMME

PAUMME is a free delay and filter plugin developed by SoundOutTheBox. Compatible OS(s): Windows .

PAUMME, Processor Audio Unit – MME, is an application dedicated to processing audio. It turns your computer into a true stereo audio processor with a user interface easy to use.

PAUMME provides Delay, Low filter, High filter, 6 EQs, Low and High Shelves on each channel. Presets can be saved and loaded.

This application works on Windows and use MME to read and write stereo audio signal on the computer input and the output.

http://www.soundoutthebox.com

Pan-Oh!-Rama

Pan-Oh!-Rama is a free multi fx and stereo imaging and filter VST plugin developed by Majken. Compatible OS(s): Windows.

Pan-Oh!-Rama is an LFO driven Auto-Panner/Tremolo/Dual Filter.

Features:

6 LFOs using 18 waveshapes for modulation.

Dual filterbanks using 6 filter types.

Easy modulation routing.

24 built in presets.

Comes in both Mono and Stereo versions.

Detailed manual included.

http://www.majken.se/