Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
Free Audio Plugins, VST, AU, AAX
Octave Shifter 2 is a real-time pitch shifting audio effect.
Key features:
- Real-time, low latency processing for live performances.
- High precision post-processing for studio quality results.
- Four full octaves of pitch adjustment.
- Continuous pitch change, enables automation of pitch parameter.
- Extensive user manual.
http://www.audiowish.com/
By Magnus @ Smart Electronix.
NyquistEq is a paragraphic equalizer that does not suffer from the treble warping that most digital equalizers do. Also it never clicks, and it handles deep bass well.
The reason it’s called NyquistEq is because it’s designed to be a filter that sounds good all the way up to the Nyquist frequency (if sampling rate is 44.1 kHz then nyquist is at 22.05 kHz).
http://www.smartelectronix.com/
NUCLEAR CRANIUM is a free Multi-Band Distortion/FSU device designed to aid in the construction of experimental music and sounds.
NUCLEAR CRANIUM works by splitting the incoming source material using a Comb Filter into four frequency layers; Hi, Mid, Low, and Else. Then each frequency layer has its own proprietary FX units with which one alters or corrupts said frequency. Each frequency layer is then recombined into one unified new sound result. All frequency layers have PITCHSHIFTING, BITCRUSHING, WAVESHAPING, “CRUNCH”, BITCRUSH, “PSYCHODELAY”, and AUTOPAN FX units individually. As well as independent Wet/Dry settings and Volume/Amplification sliders as well. Each frequency layer can be turned ON or OFF to save CPU consumption. Nearly every single NUCLEAR CRANIUM parameter has its own individual internal completely reconfigurable LFO. NUCLEAR CRANIUM’s GUI is 100% verbosely tool-tipped for ease of learning.
http://www.gersic.com/plugins/hosted/darkware/darkware.html
NRR-1 is a digital emulation of a three channels tube preamplifier for guitar. It has been developed to accurately model its real hardware counterpart, built for Fleshgod Apocalypse guitarist Cristiano Trionfera by Ignite Amps, back in 2009.
The NRR-1 core circuit is mainly based on a famous boutique preamplifier made in ’88, modded to suit Cristiano’s needs in the best possible way.
Features:
- Ignite Amps 3rd generation triode modeling engine.
- Three channels: clean, rhythm and lead, each with fully separated controls.
- Mono / Stereo processing support.
- Selectable oversampling rate (up to 8x).
- Global input / output level controls.
- Double precision (64-bit) floating point mathematical model.
- Fully automatable controls.
- Ignite Amps proprietary preset management system with bank file import/export functions.
{See video at top of page}
http://www.igniteamps.com/
NoizeDelay allows you to program four different delays at the same time. NoizeDelay is the creativity weapon for the delays in your music production and has been developed by CPS. Now you don’t need to stuck in a rut anymore. Be creative and use it for different effect purposes, like a dub-delay, an experimental modulation-delay, a ping-pong-delay, filter- or glitch-delay.
http://www.noizefield.com/
Noisebud Filter consists of 4 filters (or 16, depending on how you look upon it), they are switchable between Lo pass, hi pass, band pass and band reject filter.
The signals from the four filters are wired in a parallel chain. Every filter can be controlled by three different LFOs where one is tempo-synced; one normal and one extremely slow (a sLoFO).
The LFO sections also have something Noisebud call VariFO. It adds another movement to the LFO and makes it less predictable.
Every filter has an invert button so that you can silence frequencies that collide during heavy LFO movements, this and the VariFO is probably what make Noisebud filter special.
http://www.noisebud.se
This is a plug-in for audio noise reduction before or after applying other effects that may highly amplify noise like a distortion, compressor (sustainer, limiter) or a guitar amplifier at high gain. The main purpose is to cancel noise from a microphone or pickup of a music instrument like a guitar before sound processing rest. You hold your strings for a second or keep your microphone in silence, allowing the plug-in to study noise pattern, then you set filtering level.
http://7amp.net/
NoAmp! is a freeware emulation of a famous analog amp and cab sim stompbox effect. All stages have been emulated to provide the most authentic tone. All the original controls are featured, allowing 27 amp combinations with the 3 switches and 4 knobs to sculpt the sound.
No tedious tweaking, no complex routings, NoAmp! is aimed at instant plug & play fun.
http://www.mokafix.com/
NightShine is based on Alesis 3630 peak compressor specs:
- Single band.
- Threshold: -40.0 dB to 0.0dB.
- Ratio: 1.0:1 to 20.0:1.
- Attack: 0.1 ms to 200 ms.
- Release: 50 ms to 3 seconds.
- Output: -20 dB to 20 dB (Makeup).
- Threshold range: -inf dB. to 0.0dB, exponential curve.
- Gain depth: 0% to 100%.
- Switches: Auto Makeup, Softclip and Limiter.
- Monitor: Input, Gain, Output and Display (+Additional gain scale depth control).
https://www.discodsp.com/
Nick Crow 8505 Lead is a Tube Guitar Amplifier plug-in.
Controls:
- POWER – Power ON/OFF.
- HQ – Oversampling ON / OFF. Use OFF to reduce CPU usage, use ON to get the quality sound without aliasing (more CPU). When a project or the track is exported to a wave file (mixdown, bounce, render, freeze) oversampling is always automatically enabled regardless of the position of the button.
- GAIN – Determines the amount of gain applied by the Pre Amp.
- LOW, MID, SWEEP, HIGH – Tone Stack controls.
- POWER AMP – Determines the amount of gain applied by the Power Amp.
- VOLUME – Output level.
https://nickcrowlab.blogspot.com/