Reader

Reader free waveshaper by Icebreaker Audio

Reader is a free waveshaper plugin Reaktor developed by Icebreaker Audio. Compatible OS(s): Any OS.

Reader is a drawable waveshaper effect.

The incoming audio is distorted according to the plot in the central graph. Additional gain and filtering controls are available to further tweak the sound.

The download includes two versions of the ensemble, one mono and the other stereo.

The effect will work on any signal, but best results seem to come from synth, bass, and drums.

http://www.icebreaker-audio.com/

ReaDelay

ReaDelay free delay | echo by Cockos

ReaDelay is a free delay and echo VST plugin developed by Cockos. Compatible OS(s): Windows.

ReaDelay features:

  • Multi-tap delay, no practical limit on tap count.
  • Up to 10 second delay per tap.
  • Tap lengths can be in time (s/ms) or quarter notes.
  • Feedback, LPF/HPF, resolution reduction per tap.
  • Stereo width per tap.
  • Volume/pan per tap.

ReaDelay is part of the free ReaPlugs VST FX Suite.

General features of ReaPlugs:

  • Support for Windows 98/ME/2K/XP/Vista, WINE.
  • Fast, usable UIs with good metering.
  • Low CPU and RAM use.
  • Highly configurable.
  • No copy protection.
  • No installation required.
  • Freely usable.

http://www.cockos.com/

ReaComp

ReaComp free compressor by Cockos

ReaComp is a free compressor VST plugin developed by Cockos. Compatible OS(s): Windows.

ReaComp features:

  • Ultra-configurable compressor.
  • Soft knee support.
  • Sidechain filters, sidechain inputs.
  • Feedback compression mode.
  • Program dependent auto-release mode.
  • Variable RMS size.
  • Oversampling antialias modes (with optional limiting).
  • Optional make-up gain.
  • Optional lookahead.
  • Wet/dry mix.
  • Low CPU use.
  • Useful metering.

ReaComp is part of the free ReaPlugs VST FX Suite.

General features of ReaPlugs:

  • Support for Windows 98/ME/2K/XP/Vista, WINE.
  • Fast, usable UIs with good metering.
  • Low CPU and RAM use.
  • Highly configurable.
  • No copy protection.
  • No installation required.
  • Freely usable.

http://www.cockos.com/

Re-Psycho!

ZynAddSubFX free software-synthesizer by paulnasca 2

Re-Psycho! is a free slicer and pitch shifter and looper VST, Audio Unit developed by mda. Compatible OS(s): Windows 64b, macOS.

Drum loop pitch changer – Roughly slices the incoming audio and changes the playback speed of the slices.

http://www.mda-vst.com/

RazorEdge

RazorEdge free phaser | bit-crusher | lfo by JoBroMedia

RazorEdge is a free phaser and bit crusher and lfo VST plugin developed by JoBroMedia. Compatible OS(s): Windows.

RazorEdge is a bit-crushed phaser where the LFO is crushed to give a stepped feeling to the sound.

Made with SynthEdit

http://www.m4um.net/jbmvst/

Rare

Rare free eq by Analog Obsession

Rare is a free equalizer VST, Audio Unit plugin developed by Analog Obsession. Compatible OS(s): Windows 64b, macOS.

Something from past!

“Rare” signature for low end from past. Simply run your all mix or single tracks with magic! Shining highs, burning tubes.

True Component & Circuit Modeling

Re-drawing and designing original circuit carefully and emulated original fingerprint of gear with our technology. Carefully designed transformers and tubes. Fully emulated tube program eq.

BANDs.

Low band selectable from 20 Hz to 100 Hz. independent boost cut and famous trick.

High band selectable from 3 kHz to 16 kHz.

High cut selectable from 5 kHz to 20 kHz.

Independent clean output.

Totally clean output rom -12 dB to 12 dB. Emulating nothing! Added after tube gain stage and output transformer.

Supported Plug-in Formats

AU – VST2 (Win/OSX).

Supported Operating Systems
Mac OS X 10.7 through 10.14
Windows 7 through 10
Any VST/AU-compatible host running on a supported operating system.

Mac
Intel CPU only (minimum 2 GHz recommended).

PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher; minimum 2 GHz recommended).

System Requirements
Display resolution: 1440 × 900px or 1280 × 960px or higher
Memory: 2 GB RAM.

http://analogobsession.com/

Ranger LE

Ranger LE free filter | saturation by Ourafilmes

Ranger LE is a free filter and saturation VST plugin developed by Ourafilmes. Compatible OS(s): Windows.

Ranger LE is a smaller version of Ranger and is a very simple effect that allows you to remove unwanted frequencies and saturate the resulting signal.

It features one low cut filter and one high cut filter (12 or 24 dB per octave) and a final gain knob. There’s also a master bypass switch.

This effect has full automation.

This is a free plugin but, to download, you must be a fan of the Ourafilmes Facebook page as it is included in the Ourafilmes Facebook Free Pack.

Made with SynthMaker

http://www.ourafilmes.com/

Ranger

Ranger free filter | saturation by Ourafilmes

Ranger is a free filter and saturation VST plugin developed by Ourafilmes. Compatible OS(s): Windows.

Ranger is a very simple effect that allows you to remove wanted frequencies and saturate the resulting signal.

It features one low cut filter and one high cut filter, both up to 30 dB per octave and with a bypass switch. There’s also a master bypass switch and input and output level meters.

This effect has full automation.

This is a free plugin but, to download, you must be a fan of the Ourafilmes Facebook page as it is included in the Ourafilmes Facebook Free Pack.

Made with SynthMaker

http://www.ourafilmes.com/

Random Pattern Delay

Random Pattern Delay free delay | echo by ndc Plugs

Random Pattern Delay is a free delay and echo VST plugin developed by ndc Plugs. Compatible OS(s): Windows.

A pitched (i.e. very short) delay effect, with a pattern sequencer to control it. Not the most useful plugin, but you might find a place for it if you like weird electronic noises.

http://www.niallmoody.com/ndcplugs

RandARP

RandARP free arpeggiator by CodeFN42

RandARP is a free arpeggiator VST plugin developed by CodeFN42. Compatible OS(s): Windows.

RandARP is a VST plugin arpeggiator with many randomization features, allowing incoming notes or chords to be manipulated in various rhythmic ways. All standard arpeggiator parameters like number of octaves, note length and note order are included, but the plugin also offers complete randomization of the velocity, gate, shift and swing parameters.

In addition, you can specify a note probability and randomize the note order, the octave order, and the number of octaves. All the randomization features allows you to create more interesting and unpredictable arpeggiated sequences.

Freeware for Windows, both 32 and 64-bit.

http://www.codefn42.com