Free Audio Plugins VST, AU, RTAS

Bipro

Bipro is a free eq and filter VST plugin developed by Noisebud. Compatible OS(s): Windows.

Bipro – The Low end fix unicorn magic thing…. Nah, it’s a low-end controller.

Bipro is a plugin with different tools to control the very low end, that is below 50Hz. It’s very common that mixes made with small speakers (6″ and even 8″ inch speakers) have problems in the low end simply because they’re not able to reproduce what’s going on down there. When you try to push a mix like that to compete with commercial levels it will start to sound bad and misbehave in all kind of ways. You can hear and see one example what can happen and how to use Bipro to fix that in the demonstration video below.

New in v2.0:

Added Attack and Release to the dynamic section.

Added another filter method to the dynamic section.

Added LED indicators to give a fast visual if you actually attenuate or boost the low end.

A new setting that apply a common mastering EQ technique to unmask content below 50Hz and give a feeling of more bass even though it’s less (use with care).

https://www.youtube.com/watch?v=p95fWzTKa1I&feature=youtu.be&VQ=720

http://www.noisebud.se

Binvert

Binvert is a free eq and enhancer VST plugin developed by Noisebud. Compatible OS(s): Windows.

Binvert was originally meant to be a plain mix tool to handle phase problems when mixing several bass heavy channels, but the users seemed to use it mainly to deepen or sculpt the low end. Development have therefore been focused on the usability as a bass sculpturing tool even though the original functionality is still there.

The result is a versatile tool that you can use either as originally intended, extreme bass drum sounds or for a subtle boost in the low end while mastering.

Binvert takes the signal and splits in into two bands (split point is adjustable between 25-440Hz). After the split there’s a phase invert for both bands so you can invert the polarity of the two bands independently from each other. Problem fixed, the bass is still heavy and the mid/high transients stay crisp. You can also make that frequency resonate on either or both the upper and lower bands and you can also steer that extra energy with a ADSR curve.

Changes in 2.0:

You can now disable the resonator in both bands.

Added a simple brick wall limiter.

Added a bypass button, easier handling for mastering purposes.

Added a side chained ADSR.

Added the ability to totally turn off the bands.

Added a incoming gain button.

Added wet / dry control.

Noisebud’s donationware: There’s always a free, fully featured, version of every plugin but it will be in black & white. If you appreciate our work and donate you’ll get a full color version of the plugin.

http://www.noisebud.se

BIGREV

BIGREV is a free reverb VST plugin developed by WOK. Compatible OS(s): Windows.

BIGREV is a VST reverb effect plugin aimed for long and deep reverb tails.

As all plugins in our OTP series, it’s designed to give maximum sound with a minimum of complexity, so the GUI is reduced to the essential controls.

Although shorter reverb times are also adjustable, this plugin may not be the first choice for daily use but for special effects, e.g. ambient songs or eerie atmospheres.

BIGREV is a free bonus for all customers with a purchase / donation made between Jan 1st and March 31st 2014.

http://www.wokwave.com

BFS-1

BFS-1 is a free frequency shifter VST plugin developed by WOK. Compatible OS(s): Windows.

BFS-1, a virtual recreation of the Bode Frequency Shifter.

Different from a pitch shifter, a frequency shifter moves all frequencies/harmonics by adding a fixed amount. The sound is similar to a ring modulator but it is possible to get the upshifted and downshifted signal separately. Unlike a ring modulator, the frequency shifter is also capable of changing the signal by a low amount, e.g. 1 Hz, to obtain effects known as “Barberpole flanging”.

This plug-in has some additional features like feedback delays in the shifting sections, an LFO (all host synced), an envelope with MIDI trigger and an envelope follower to modulate shift and/or volume.

http://www.wokwave.com

Bformat2Binaural – Ambisonic Binaural Decoder

Bformat2Binaural – Ambisonic Binaural Decoder is a free stereo imaging VST plugin developed by Digenis. Compatible OS(s): Windows.

Bformat2Binaural – Ambisonic Binaural Decoder allows you to decode up to 1st order Ambisonics for playback over headphones.

In this plug-in, four speaker feeds are derived from an Ambisonic sound field, and those feeds are convolved with the corresponding HRTF for those speaker positions. The speaker positions are 0, 90, 180, and 270 degrees. Since the left and right ear HRTF are the same at 0 degrees, there is one less convolution required. Same applies for the rear 180 degree position, avoiding a total of two convolutions as opposed to eight required if the speakers were positioned at 45, 135, 225, and 315 degrees.

While this method requires less processing power, it does not ‘seem’ to provide as clear a sound field as when decoding speaker feeds with positions 45, 135, 225, and 315. More trials need to be done into this.

Even though it uses the compact 128 tap HRTF set available from the MIT Media Lab instead of the full 512 tap set, it uses straight convolution as opposed to FFT convolution, and as a result is quite CPU intensive.

See B-Binaural for an extended version of this plug-in in Audio Unit format, using FFT convolution for faster processing.

Features:

1st order.

Horizontal.

128 tap filters.

64 bit processing.

http://www.digenis.co.uk/

Better Run

Better Run is a free overdrive and saturation VST plugin developed by RunBeerRun. Compatible OS(s): Windows.

Better Run is a high gain overdrive plug-in for the electric guitar. It features 3 gain modes and an optional midrange boosting circuit.

https://runbeerrun.blogspot.com/

Best served cold

Best served cold is a free overdrive and saturation VST plugin developed by RunBeerRun. Compatible OS(s): Windows.

Best served cold is an amplifier simulator for the bass guitar with a 3-stage preamp section. It is similar to hardware preamps that accentuate dynamics.

https://runbeerrun.blogspot.com/

bent

bent is a free glitch VST plugin developed by de la Mancha. Compatible OS(s): Windows.

bent is a circuit-bent resynthesis effect. It will recreate the incoming audio into an approximation of itself using a waveform-morphing audio oscillator. Depending on the volume and pitch of the audio, it will gate, stutter and morph the output in sync with your host tempo.

https://delamanchavst.wordpress.com

Berrtill

Berrtill is a free overdrive and saturation VST plugin developed by Shuriken. Compatible OS(s): Windows, macOS.

Berrtill is a distortion-unit modelled on circuit bent hardware.

http://www.shuriken.se/

Belle Filter

Belle Filter is a free filter VST3, Audio Unit, AAX plugin developed by Babelson Audio. Compatible OS(s): Windows 64b, macOS.

Belle Filter is a simple emulation of the world’s most desirable console module:

Based on the vintage HLS console module.

Band-stop filter.

Rare Q factor.

How to download Belle Filter

Click Add to cart button. Get your free and fully functional Belle Filter plug-in.

How To Install Belle Filter

Once the package is downloaded double-click the downloaded .pkg (Mac) / .msi (Win) file to start the installation. The installer will be verified and a welcome window will pop up.

https://babelson.com/