Free Audio Plugins VST, AU, RTAS

Buffer Synth 2

Buffer Synth 2 is a free buffer synth VST plugin developed by ndc Plugs. Compatible OS(s): Windows, macOS.

Buffer Synth 2 is a buffer manipulation plugin, designed to do a number of different things with audio buffers. It could be thought of as a cross between GRM Tools’ Freeze and a wavetable synthesizer, in the way it can be used as either an effect-type plugin, or as an instrument in its own right. To get the most out of it, you’ll need a relatively flexible plugin host – most importantly, one which will allow you to send MIDI data to effects plugins.

Features:

2 separate buffers (88200 samples in size) – can record the incoming audio stream or WAV files can be loaded.

Amp and Mod ADSRs.

2 LFOs.

LP/BP/HP resonant filter.

MIDI Learn.

Synth Mode.

http://www.niallmoody.com/ndcplugs

Buffer Delay

Buffer Delay is a free delay and echo Audio Unit plugin developed by Expert Sleepers. Compatible OS(s): macOS.

Buffer Delay is a utility plug-in that delays audio by an exact number of sample frames, which can be useful when attempting to sync up audio accounting for delays through certain digital devices.http://www.expert-sleepers.co.uk/

BTQ2

BTQ2 is a free equalizer VST plugin developed by J1000. Compatible OS(s): Windows.

BTQ2 is twisting equalizer for bass and treble. Twisting works differently from usual equalization because it relatively preserves output loudness. It does that by using two interlocked pairs of shelf and peak filters – when shelf filter goes up, peak goes down, and vice versa. Some famous studio equalizers use this method to achieve deep bass and sparkling treble while simultaneously reducing muddiness and harshness. You can use it on whole mixes or on individual tracks and it will always speed up the work because it’s simple and intuitive:

Independent bass and treble equalization modules.

Each module consists of interlocked pair of shelf and peak filters.

Filter slope is adjusted with span control instead of standard Q factors.

Additional module for spectrum tilting.

32-bit internal precision with zero latency and low CPU consumption.

No introduced harmonic or dynamic distortion, no hidden signal processing.

http://www.jovaniljadica.com/j1000

BRSfx

BRSfx is a free distortion and glitch VST plugin developed by anosci. Compatible OS(s): Windows.

BRSfx is short for “Bad Radio Signal effect.”

It converts the incoming signal into something emulating an FM radio transmission, applies various distortions, and decodes the result.

This becomes very noisy very quickly, so exercise caution.

http://anosci.net/vsts.html

British Valve Custom (BVC)

British Valve Custom (BVC) is a free overdrive and saturation VST, Audio Unit, RTAS plugin developed by Studio Devil. Compatible OS(s): Windows, macOS.

Studio Devil BVC (British Valve Custom) is a guitar tube amplifier modeling plug-in that is designed to mimic the character of “British”-style vacuum tube heads. This virtual tube amplifier processor is based on authentic models of 12AX7A vacuum tube preamps and tube power stages. While primarily intended for guitar amp modeling and direct recording of both electric guitar and bass, Studio Devil BVC excels wherever natural tube overdrive and distortion is needed.

British Valve Custom features the basic controls of a guitar amp: GAIN, TONE, and DRIVE. It is based on the gain structure of popular British Valve (Tube) heads like those made by Marshall with some subtle modifications to give it slightly more gain. The dynamic response and tone is faithful to those from real vacuum tube amps and reacts to your playing style just like the real thing.

Features:

Accurate 12AX7A vacuum tube preamplifier stage emulation with DRIVE control.

Gain structure signal path that’s true to those on vintage tube amp schematics.

Authentic Bass, Mids, Treble, and Presence TONE controls just like those on real tube amps.

Push-pull tube power amplifier model with DRIVE control.

FIR-based speaker/cabinet/mic modeling filter built in for a “miked-up” tone.

4X Up-Sampling Engine with 64-bit Internal Floating-Point Precision.

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, and 196kHz sampling rate support.

http://www.studiodevil.com/

Breath Cube

Breath Cube is a free vocoder VST plugin developed by xoxos. Compatible OS(s): Windows.

Breath Cube employs the ‘pop music generating’ engine of Cube Breath and adds a 3-band synthetic voice to “challenge your listening skills”.

Breath Cube was created using SynthEdit and runs as a standalone with the included SAVIHost application or as a VST plug-in.

The Breath Cube GUI features artwork by Shane Sanders.

https://www.kvraudio.com/developer/xoxos

Brainworx bx_subfilter

Brainworx bx_subfilter is a free filter VST, VST3, Audio Unit, AAX plugin developed by Plugin Alliance. Compatible OS(s): Windows 64b, macOS.

Polishing your mix’s low end can be tricky. Bass DI tracks can sound mushy, and kick tracks can lose their “pop.” Sometimes everything below 100Hz can become such an undifferentiated soup of noise that you just don’t know where to start. Start here: The bx_subfilter is just the ticket for adding clarity and definition to tracks that have troublesome low frequencies. There are lots of expensive and complicated EQ plugins out there, but when it comes to shaping your low end, the bx_subfilter is unique for its ease and simplicity. With just a few quick adjustments to its four-knob interface, you can breathe new life into those 808s that have been muddying your mix.

The bx_subfilter is a free plugin that borrows from the “Filter” section of its larger counterpart, the bx_subsynth. It’s the perfect plugin for anyone who loves the bx_subsynth’s unique approach to low-end filtering, but doesn’t need the subharmonic synthesis. If you think that cleaning up your low end shouldn’t break the bank or require twenty knobs, we’ve got a plugin for you.

Sign up at Plugin Alliance today and you’ll get instant access to the bx_subfilter, along with our five other free plugins. No dongles, no hassles, and no payment required.

This free plugin will be added to your account automatically when you join Plugin Alliance. If you already have an account you can download and start using this plugin today.

Features:

Tight Punch knob implements a resonant high pass filter that’s especially formulated for cutting problem frequencies in bass-heavy tracks.

Resonance selector applies three peak settings to the filter – Low, High and Extreme – for accentuating punch while taming low-end rumble.

Low End control applies a post-Tight Punch fixed bandpass filter, to achieve that perfect frequency balance.

Input/output gain controls for level matching and preventing clipping.

{See video at top of page}

http://www.plugin-alliance.com/

Brandulator

Brandulator is a free harmonizer and vocoder VST plugin developed by Stone Voices. Compatible OS(s): Windows.

VST-plugin «Brandulator» creates special audio-effect with a peculiar sounding which is similar to a flanger, a vocoder and a harmonizer, but has other principle of operation in case of which the input signal branches on three channels of processing by the set-up comb filters, the tonality of their setup can will change to 16 times for a clock period (Bar). The effect also performs functions of the peculiar arpeggiator functioning synchronously with DAW therefore the detail design shall have the corresponding musical size though it isn’t mandatory. Tonalities of settings of each channel can be set as in manual by means of governing bodies, and is accidental according to the given harmonic law selected from the list numbering about three hundred different harmonies. Randomization of tonalities can be made both manually, and automatically at the beginning of everyone 1,2,3. 8th clock period. This plug-in is the free software (Freeware).

Related Forum Topic

Donation

http://stone-voices.ru/

Brainworx bx_solo

Brainworx bx_solo is a free stereo imaging and signal monitoring VST, VST3, Audio Unit, RTAS, AAX plugin developed by Plugin Alliance. Compatible OS(s): Windows 64b, macOS.

M & S solo knobs. free! Just grab it.

bx_solo is a nice little tool that we have designed to get you started with and used to the way we approach the M/S technique – be it for recording-, mixing- or mastering purposes.

Description

L (LEFT channel), R (RIGHT channel), M (MONO sum, mid signal) & S (STEREO-Difference, side signal) – and all this phase-corrected (when needed) and mono-ed out on both speakers of your system. This is very helpful when working in M/S modes (because especially listening to only the S-signal of a stereo mix is not so easy to do with modern DAW stations) and to check your signals / mixes for errors, noises, clicks, whatever…

bx_solo also contains a stepped M/S Stereo Width Control, so you can get an impression about what you can actually do with it. Do try it out on subgroups (makes rock guitar subgroups jump out of your speakers at about 150%!), FX returns, keyboards / samplers, etc.

Using the Stereo Width Control too heavily may lead to phase problems. bx_control & bx_digital both have the Mono Maker on board – this tool will be able to get rid off these phase problems with its unique way of mono-ing out your stereo signals / mixes only in the bass frequencies – Mono Maker is the solution – unless you really over-do the settings…

To be able to fine-adjust the Stereo Width Control (and use Mono Maker at the same time for best results!) please try bx_control.

Features:

Fully automatable.

“Mouse Over” feature: adjust the parameters by holding the mouse over any knob and simply turn your mouse wheel.

Direct access: just type in any valid number into the text fields for direct access to the exact value.

http://www.plugin-alliance.com/

Brainworx bx_rockrack V3 Player

Brainworx bx_rockrack V3 Player is a free amp simulator VST, VST3, Audio Unit, AAX plugin developed by Plugin Alliance. Compatible OS(s): Windows 64b, macOS.

OVERVIEW.

The bx_rockrack V3 Player is your ticket to getting stellar guitar tones for absolutely free! By including the same eight immaculate guitar amp simulations as the fully-featured bx_rockrack V3 implemented across 26 professionally designed presets, bx_rockrack V3 Player gives you access to some of the best tones Brainworx has to offer.

The straightforward interface of bx_rockrack V3 Player makes it easy to select between the included presets while seeing which settings are being used. Although this preset only Player version doesn’t allow you to modify those settings, it’s still packed with versatile and useful tones.

Sample clean tones from Brainworx’s Marshall JCM-800 emulation, or grind out with some metal mayhem from overdriven ENGL preamps. Included in the amp selection from bx_rockrack V3 is an original design by Brainworx, the bx_metal 666, conceived by founder and CEO Dirk Ulrich and Senior DSP Engineer Igor Nembrini.

With bx_rockrack V3 Player you can get tone for days. Stack some distortion pedals before the clean Pedalboard Haven preset for a customized grunge feel, or squeeze your DI signal with a bx_opto Pedal going into the lead ENGL Rock Hard preset. With the free preset Player from bx_rockrack V3, you have a whole slew of sounds straight from the Brainworx guitar lab to use any way you please.

All you need to do in order to sample the awesome amp sim power of bx_rockrack V3 is download and install bx_rockrack Player, then activate with your Plugin Alliance account login information; no dongles, and no serial numbers. You’ll be rocking with Brainworx amp power in no time.

Legal Disclaimer: JCM 800 is a registered trademark of Marshall Amplification plc. The bx_rockrack V3 ‘Clean 800’ and ‘Crunch 800’ amps were developed by Brainworx Music & Media GMBH based on its own modeling techniques. Marshall Amplification has not endorsed nor sponsored the bx_rockrack V3 in any manner, nor licensed any intellectual property for use in this product.

FEATURES:

26 presets featuring eight powerful guitar amp models in one plugin:

Clean 800: Clean channel from the Marshall JCM 800 2210.

Crunch 800: Lead channel from the Marshall JCM 800 2210.

Clean ENGL 530: Clean channel from the ENGL 530 Tube Preamp.

Lead ENGL 530: Lead channel from the ENGL 530 Tube Preamp.

Jazz Clean: Based on the ENGL 530 preamp clean channel.

Jazz Crunch: Based on the ENGL 530 preamp lead channel.

Modern Rock: Mesa Boogie Rect-O-Verb 50W.

Metal BX 666: Brainworx amp design by Igor Nembrini and Dirk Ulrich.

Easy to use preset toolbar is fully automatable, allowing on-the-fly tone changes while tracking or mixing DI guitar tracks.

Master Output control allows you to adjust volume to taste.

Use sounds from growling metal mayhem to soaring ballad leads to crisp and clean Jazz riffs all in one amp plugin.

Select predesigned tones from a wide array of professionally recorded cabinet responses from famous studios around the world.

{See video at top of page}

http://www.plugin-alliance.com/