Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
A filter delay built from the ground up for EDM, focusing on overlapping quantized delays and allowing filter sweeps with a single parameter. Includes visual display with an astonishing high resolution FFT so you can literally see the effect of filters in real time, preset saving and sharing, and full automation for all parameters.
http://www.stagecraftsoftware.com
Delay can be run both free running and tempo synced with various stereo and feedback options. Most notable however is the duck feature, which optionally only lets the echoed sound through when there is no dry input signal. This allows for long and heavy delay while still avoiding clutter over the original sound:
- Delay display – The amount of time beore the delayed sound starts playing. This will be expressed in milliseconds or as parts of a beat, depending on Sync Mode.
- Sync Mode – When sync is enabled the delay time will be synchronized to the song tempo.
- Feedback knob – The feedback setting will cause the delayed sound to feed back into the delay. This will create an exponentially decaying echo.
- Pan knob – Adjust the panning of the delayed sound.
- Ping-Pong – Swaps the left and the right channel of the delayed sound when it is fed back into the delay. When combined with panning this will make the echo bounce back and forth between the speakers.
- Duck knob – When duck is turned up, the output volume from the delay will automatically be lowered when the input volume is high.
- Mix knob – The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
- Settings panel – Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.
- Enabled checkbox – The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
- Resize handle – The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Delay as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.).
Delay shines on it’s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now.
Delay is also available as a Rack Extension for Reason over at the Propellerhead shop.
http://kilohearts.com/
The Delay Bundle / Delay Kit is a collection of plugins that Tom Erbe (SoundHack) developed as class demonstrations while teaching computer music and studio technique at UC San Diego. All of these are derived from the same basic delay algorithm: a hermite interpolated delay line with variable modulation, and a feedback loop with dc blocking and saturation. Pitch shifting is achieved with a dual head crossfading delay (ala Eltro Tempophon/Dennis Gabor/Pierre Schaeffer phonogene) and is decidedly low-? The saturating feedback also allows them to be great drone and noise generators.
The plugins are:
- ++flipper – synchronized reverse delay.
- ++bubbler – a flexible and MIDI playable granular delay.
- ++pitchdelay – old school multitap delay-based pitch-shifting.
- ++delay – a fully featured 10 second delay, with extensive modulation and feedback filtering.
http://www.soundhack.com/
The Delay Box follows our perspective of Stompbox style simplicity blended with rack processor style features, designed with straightforward use in mind.
Features five modes covering Digital style sharpness to either analog BBD and tape delay dirtiness plus a switchable Pre-Delay mode for extended rhythmic performance.
The Delay Box is fully automatable and has the ability to store 64 presets. It ships with a few already pre programmed ones to get you straight into its features.
Installation procedure: Unzip the file, then copy the DLLs into your VstPlugins folder.
Simple stereo delay with feedback tone control.
http://www.mda-vst.com/
- Six delay lines with multimode filter and panning per delay.
- Synced or manual delay time controls, delay time up to 80 seconds.
- Buttons to deactivate the delay, mute the input or choose L or R as input.
- Delay routing.
- Internal limiters on every delay to be able to create distorted feedbacks without blowing up your speakers.
- PANIC button to lower all feedbacks at once.
- Input button: Turns input On/Off.
- Hints on all controls that makes the plug pretty self explanatory.
- MIDI automation and MIDI learn.
https://www.kvraudio.com/developer/klanglabs
Danaides is a sequenced sound mangler with a powerful modulation section.
It gives you the ability to route the input signal through a filter and three sound destruction effect processors : a “driller” that will loop and repitch very small slices of the signal, a “metalizer” delay and a samplerate reducer.
With the built-in effect and dry-wet sequencers, you can generate various tempo-synced effect phrases and modulate the overall depth of the effect.
Danaides includes a powerful LFO section with flexible routing and waveform morph.
Additional features include the ability to resize the plugin interface to fit your display (Windows and OS X only), share your presets between plugin formats and platforms, map your MIDI controller easily using the built-in MIDI learn system, trigger presets using MIDI program changes, as well as a TouchOSC layout to give you instant MIDI control of all the parameters.
Danaides comes loaded with a nice selection of presets from great sound designers and artists IVO IVANOV, ABSTRACT CATS and DAED.
Features :
- 3 sound mangling effects : “driller”, “metalizer” and “reducer”.
- 1 pre-filter with mode morph (Lowpass, Bandpass, Highpass).
- effect selection sequencer.
- dry-wet sequencer.
- 2 Morph LFOs with 2 sub-LFOs each.
- host tempo sync for the LFOs.
- modulation inputs for each effect/filter parameters.
- sequence randomizers.
- global randomizer.
- MIDI learn.
- MIDI program change support.
- MIDI layout for TouchOSC on IPad.
- Vector based resizable User Interface (resizing only on Windows and OS X).
- Cross-platform presets.
- 61 factory presets.
- Lifetime free updates for registered customers.
https://ineardisplay.com
CromFX is a vintage-style effect plug-in with different chorus, phaser and delay models.
CromFX features 4 chorus variations, modelled after vintage circuits, 3 phaser types and the choice between 2 delays with host sync, of which one is simulating a tape delay.
The multi-chorus unit delivers lush and deep modulation sounds. The deep phaser effect and the delay can be added to accomplish the vintage sound.
The reproduction of the sonic instabilities of old hardware in this plugin transforms a simple sawtooth synth into a swirling string ensemble or a wide analog pad. But the comprehensive controls make it suitable for a wide range of signals from bass or drums to even vocals.
http://www.wokwave.com
Cocoa Delay is a free, open-source delay plugin in VST format. It focuses on clean design, easy operation, and a warm, lively sound.
Notable features:
- Delay time drift, for giving the wet signal a slight wow/flutter effect.
- Adjustable wet level ducking based on the input signal.
- Static, ping-pong, and circular pan modes.
- Drive section based on open-source Airwindows saturation code.
Cocoa Delay is free and open-source! If you’re a programmer type, you can check it out on GitHub.
You can also read a manual here.
https://tesselode.itch.io/
ClockWise Orange is a fractional delay based plug-in. With its multiple controls, it lets you perform many sound transforms which are well adapted to electroacoustic music. More than most traditional plug-ins, it is very convenient in live or interactive situations, since many interesting phenomenon appear while you interact with one or many of the parameters.
The provided version is free and fully functional, and includes a reference manual and a large set of example presets. Contact the author if you want a copy of the source code.
https://www.kvraudio.com
