Download Tag: Synthesis

Double Six XXL is a 6-operator FM synth with 32 DX7 algorithms and 16 4-operator algorithms.

Features:

• 6-operator FM synth with 32 DX7 algorithms and 16 4-operator algorithms.
• Every operator has its own envelope. You can choose between 1 and 8 stages and set the sustain point from 1 to 7 or off.
• Every operator has a clipper, overdrive, lowpass filter and a distortion.
• 2 octave sequencers with Destinations operator 1 to 6.
• 4 envelopes with retrigger mode on BPM rates.
• 3 LFOs with 19 different waveforms with 16 different BPM rates and free rate (manual) mode. Destinations of the LFOs are pitch operator 1 to 6, phase modulation 1 to 6 and cutoff.
• The LFOs can start free (any point of the LFO waveform), gated starts when you hit a key or first (starts when you hit play in the sequencer).
• An octave pitch.
• 14 different curves for the envelopes. All envelopes have a time knob. You can switch between the envelope and volume.
• The operators can be disabled, fixed or pitched and have a octave range from -6 to 3, fine-tune and pulse width.
• 11 different waveforms for the operators.
• The filter has the same envelope and there are 10 different filters types low-pass 12db, low-pass 24db, low-pass db32, hi-pass, band-pass, CK low pass, CK Band pass, CK hi pass, CK notch and CK peak.
• Volume envelope.
• EZ preset: This allows you make new sounds fast. You can reset all fine-tunes with the hit of a button or change all waveforms, set all the octaves the same and the times of the envelopes.
• Phase modulation depth control and a feedback control.
• Volume envelope.
• Note sequencer.
• Build in effects are Chorus, stereo delay, gater, clipper, overdrive, distortion and phaser effects.
• Velocity controls.
• Voice/poly control.

https://theodosynthsarchive.wordpress.com/

Double Six is a 6-operator FM synth with 32 DX7 algorithms and 16 4-operator algorithms.

Features:

• 6-operator FM synth with 32 DX7 algorithms and 16 4-operator algorithms.
• Every operator has its own envelope. You can choose between 1 and 8 stages and set the sustain point from 1 to 7 or off.
• Every operator has a clipper.
• 2 octave sequencers.
• 3 envelopes with retrigger mode on BPM rates.
• 3 LFOs with 19 different waveforms with 16 different BPM speeds and free rate mode.
• 14 different curves for the envelopes. You can disable the envelope to save some CPU. All envelopes have a time knob.
• The operators can be disabled, fixed or pitched and have a octave range from -6 to 3, fine-tune and pulse width.
• 11 different waveforms for the operators.
• The filter has the same envelope and there are 5 different filters types (low-pass 12db / low-pass 24db / low-pass db32 / hi-pass / band-pass).
• EZ preset: This allows you make new sounds fast. You can reset all fine-tunes with the hit of a button or change all waveforms, set all the octaves the same and the times of the envelopes.
• Phase modulation depth control and a feedback control
• Master and volume envelopes.
• One BPM LFO for PMD operator 1 to 6, pitch 1 to 6 and cutoff.
• Chorus, stereo delay, gater and phaser effects.
• MIDI Learn.
• 128 preset + 32 made by Cuppa.

https://theodosynthsarchive.wordpress.com/