Fletchy-Muncher is a free metering VST plugin developed by Noisebud. Compatible OS(s): Windows.
http://www.noisebud.se
Fletchy-Muncher
FL4TT3RY
FL4TT3RY is a free compressor VST plugin developed by platinumears. Compatible OS(s): Windows.
FL4TT3RY is a gentle and flattering compressor intended for use on busses, but which also works well on individual channels. It’s inspired by (but not strictly modelled on) a specific hardware compressor, which shall remain nameless.
Features:
- Very soft knee which gradually ramps up the ratio until (eventually) reaching limiting.
- RMS based level detection, with a window size that varies depending on the attack time.
- Powerful envelope shaping with no calibration for the time constants: use your ears.
- Switchable high-pass filter for the sidechain.
- Switchable asymmetric soft clipping to prevent overs.
- Zero latency.
- Low CPU use.
http://www.platinumears.com/plugins.html
FiltSeq
FiltSeq is a free filter VST plugin developed by Sonic Assault. Compatible OS(s): Windows.
FiltSeq is a 16-step 4-sequencer stereo/mono state variable filter with independent timing for frequency, resonance and left/right channels.
http://homepage.ntlworld.com/jez.price/
FilterGrizzly2
FilterGrizzly2 is a free filter and saturation VST plugin developed by CFA-Sound. Compatible OS(s): Windows.
Finally, after some years in the dark the all-new FilterGrizzly 2 is available as free filter VST plugin. Rich on character and warmth, the completely overworked filter module is loaded with a tube-based filter drive unit for saturation, followed by an analog modelled 4-pole lowpass and 2-pole highpass filter with a passive controlled feedback circuit. The FilterGrizzly2 gives you nearly one-to-one the filter of the upcoming MonoGrizzly 2 synthesizer, all informations about that you can find here: blog/coming-soon-monogrizzly2
Features:
- 2x oversampling and anti-aliasing algorithm.
- tube-based filter drive unit.
- classic analog ladder filter design.
- 4-pole lowpass and 2-pole highpass filter.
- passive controlled feedback circuit.
- new GUI with 2 different skins.
{See video at top of page}
All samples in the demo are taken from the SOR Minimal Techno Revolution Vol.3 sample pack.
Platforms:
- VST 2.3 (32-bit) for Windows.
- Note: FilterGrizzly 2 could maybe work via jBridge in a 64-bit DAW, but we don’t guarantee that.
Requirements:
- Win32 compatible OS with SSE2-supporting CPU (or higher).
https://www.cfa-sound.com/
Filterbank
Filterbank is a free filter VST plugin developed by WOK. Compatible OS(s): Windows.
Filterbank is an 8-band filterbank plug-in with adjustable volume and frequency for each band, a bandwidth control for all bands and a bypass switch.
Features:
- 8-band filterbank.
- Adjustable volume and frequency for each band.
- Bandwidth control for all bands.
- Bypass switch.
- Frequency analyser.
http://www.wokwave.com
Filllter
Filllter is a free filter VST plugin developed by scamme. Compatible OS(s): Windows.
Filllter is a simple LP / HP / BP / Notch / Moog filter plug-in.
http://www.sanusart.com/
FerricTDS – Tape Dynamics Simulator
FerricTDS – Tape Dynamics Simulator is a free exciter and enhancer VST plugin developed by Variety Of Sound. Compatible OS(s): Windows.
FerricTDS – Tape Dynamics Simulator was the Winner of the KVR Developer Challenge 2009.
Inspired by the smooth dynamic shaping capabilities of some high-end reel-to-reel tape recorders, FerricTDS – Tape Dynamics Simulator simulates three of the most distinctive and much appreciated sonic effects generated by these devices:
- Dynamics: gently shaping the overall dynamic response.
- Saturation: adding extra harmonic-related content.
- Limiting: controlling peak performance.
Functions at a glance:
- Performs gentle audio dynamic treatments.
- Masters difficult to handle audio material.
- Adds extra harmonics and saturation effects.
- Controls outgoing audio peaks.
FerricTDS features 4x oversampled core algorithms, performance-critical parts are written in assembler and it is SSE-optimized.
https://varietyofsound.wordpress.com/
Feedback-y Thing
Feedback-y Thing is a free delay and echo VST plugin developed by ndc Plugs. Compatible OS(s): Windows, macOS.
Feedback-y Thing is a simple delay set to work with very short delay times, and high feedback. It’s probably most useful on guitars, as a kind of fake (amp) feedback effect.http://www.niallmoody.com/ndcplugs
faIRmageddon
faIRmageddon is a free amp simulator VST, VST3, Audio Unit, AAX plugin developed by forward audio. Compatible OS(s): Windows 64b, macOS.
faIRmageddon – Guitar Cabinet Impulse Response Designer Plug-in
faIRmageddon is a community project with the goal to create the ultimate Guitar Cabinet Impulse Response Designer for the growing needs of guitar players of the 21st century. With thousands of high quality guitar cabinet impulses & amp simulations out there it’s easy to get a good guitar sound. But only good sounding is not enough anymore! What you deserve is your own awesome and UNIQUE sound.
With faIRmageddon you’ll be able to load, combine, adjust, merge & manipulate your IRs to achieve this goal with ease. You’ll love how this plug-in will change your perception of guitar sound forever.
http://www.forward-audio.com
faderratic
faderratic is a free lfo and glitch VST plugin developed by de la Mancha. Compatible OS(s): Windows.
faderratic brings you cross-fading of 2 stereo inputs, but with a mind of its own and a ton of options to change the fade shape, length, limits, frequency and probability. faderratic works by generating a pulse on a tempo-sync frequency and, depending on the probability, it may trigger a cross-fade event. You can optionally make the fader auto-return to either side and, if you feel like it, trigger a fade manually or control the fader movement totally manually.
NOTE: faderratic is a multi-input effect plugin with 2 stereo inputs. You need a host that allows multi-input effects, such as energyXT, for the cross fading to work. If your host does not allow multi-input effects, you can still use faderratic as a gate, as it will cross-fade 1 stereo input with silence.
Features:
- Probability based auto-cross-fader.
- Cross-fade is triggered based on user defined frequency and probability.
- Cross-fade duration in ms.
- 13 different envelope shapes for the cross-fade.
- Trigger alternate fades or auto-return to either input pair.
- Partial fades by scaling the throw and fader limits.
- 4 fade laws.
- Manual trigger.
- Option to manually control cross-fader.
- All controls assigned to MIDI CCs.
https://delamanchavst.wordpress.com