Mixing

GLow

GLow is a free filter VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GLow is a resonant low-pass filter. It is used to remove all frequencies from a signal above a given cut-off point.

Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.

Resonance can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.

http://www.gvst.co.uk/

GK Amplification 2 Le

GK Amplification 2 Le is a free amp simulator Stand Alone, VST, VST3, Audio Unit, AAX plugin developed by Audified. Compatible OS(s): Windows, macOS.

Plug-in and a standalone application including exact model of Gallien-Krueger amp and speaker. GK Amplification 2 LE is the Light version of GK Amplification 2 Pro.

Enhance the bass tracks in your DAW application or use the wide possibilities of the standalone application to perform live, practice with your favourite tracks or record your bass ideas. All the functions of the original amp are available. All controls work the same way as their hardware counterparts.

The Gear

Simulated amps: Gallien Krueger MB150.

Simulated cabs: MB 150.

Simulated mic: Audix D6.

Compose and practice.

GK Amps’ advanced track player lets you play along with your favourite artists and learn their songs. Speed control alows you to slow down, if you can’t make it, or even speed up. Built in recorder will keep every new riff safe. Record dry bass sound, processed or even mix with the track player.

Record and mix

GK Amplification 2 can also be used as a plug-in module for host applications. That makes bass recording so easy. Forget about miking your (hardware) amp. Just DI your bass and GK Amplification LE will do the rest.

Play live

There’s no need to move around heavy stacks for every show. Simply take your laptop with GK Amplification 2 installed and use it instead. The application can be easily controlled by any MIDI controller.

http://www.audified.com/

GHi

GHi is a free filter VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GHi is a resonant high-pass filter. It is used to remove all frequencies from a signal below a given cut-off point.

Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.

Resonance can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.

High-pass filters are especially useful for removing unwanted or inaudible bass frequencies. In a mix, you usually want the bass to come from one or two specific tracks. Removing the bass from the other tracks can make mixing easier and help eliminate “mud” from the final mix.

http://www.gvst.co.uk/

GGate

GGate is a free gate VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GGate is a noise-gate effect. It silences the signal when its level drops below the threshold, given by the Thresh parameter.

You can specify the Fade, which is the amount of time taken to mute the signal, and the Attack, which is the time taken to unmute the signal.

When you are mixing several recorded tracks together, the little noise present in each adds up. During quieter passages, the background noise from “silent” tracks can become a problem. A noise-gate is a simple and convenient way to silence the parts of a track that are supposed to be silent.

http://www.gvst.co.uk/

GetaBlitch Jr.

GetaBlitch Jr. is a free gate VST plugin developed by BetabugsAudio. Compatible OS(s): Windows, macOS.

GetaBlitch Jr. is a free sequenced gate effect that is different from traditional “trance gates” in two significant ways: first, it uses MIDI to sequence the gate, rather than a built-in step sequencer; second, it gates the left and right channels of a stereo signal independently and potentially simultaneously.

http://www.betabugsaudio.com/

GDuckDly

GDuckDly is a free delay and echo VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GDuckDly is a digital delay that allows the wet signal to be compressed by the dry signal.

Using high levels of feedback in a digital delay can create a busy sound. This can obscure the original, dry signal. In particular, it can make vocal tracks incomprehensible.

The compression in GDuckDly is configured so that the effect is turned down when the dry signal sounds. When the dry signal is quiet the effect is turned back up. This allows the dry signal to be heard over even extreme delay effects.

http://www.gvst.co.uk/

GDelay

GDelay is a free delay and echo VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GDelay is a digital delay effect. The delayed signal can also be fed-back into the delay line.

The output is a mix of the original and delayed signals. The level of each is controlled by the Dry and Effect parameters.

http://www.gvst.co.uk/

GComp2

GComp2 is a free compressor VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GComp2 is a compressor featuring a band-pass filter and a gate.

The compression is controlled with the Attack, Release and Compress parameters. The Compress parameter controls the compression curve, replacing the usual threshold and ratio parameters.

The level of the signal going into the compressor also affects the result. The Gain parameter controls the input gain. The Output parameter can be used to control the output level.

The gate is actually an expander, which turns the signal down when it drops below a given threshold. The Gate parameter sets that threshold.

http://www.gvst.co.uk/

GComp

GComp is a free compressor VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GComp is a combined compressor and limiter for controlling the dynamics of an audio signal.

GComp tracks both the peak and the RMS level of the incoming signal. The level considered for compression can be either of these, or a mix of both. The mix is controlled by the RMS/Peak parameter.

The compression curve is defined by the Threshold, Ratio, Limit and Softness parameters, and is displayed on the GUI.

The GUI also features a wave-display that shows the compression and limiting thresholds relative to the incoming audio.

http://www.gvst.co.uk/

GChorus

GChorus is a free chorus VST plugin developed by GVST. Compatible OS(s): Windows 64b, macOS, Linux.

GChorus is a chorus effect. The incoming signal is mixed with a delayed copy of itself. The effect is created by modulating the playback speed of the delayed copy.

GChorus uses a sinusoidal LFO to vary the playback speed of the delayed signal. The magnitude and rate of this LFO are set using the Depth and Freq parameters.

When GChorus is used on a stereo signal, a separate LFO is used for each channel. The R Phase parameter controls the phase of the right-channel LFO relative to the left. When R Phase is 0°, the two LFOs are synchronised. Changing the R Phase parameter causes the two LFOs to oscillate independently, which adds width to the sound.

The Mix parameter controls the mix of the original and delayed signals.

http://www.gvst.co.uk/