EQTurbo

EQTurbo free eq by DUBturbo

EQTurbo is a free equalizer VST plugin developed by DUBturbo. Compatible OS(s): Windows.

Simple, Fast, Double Precision, Full Control EQ!.

Four nodes (control arch of each as well as placement), Highpass and Lowpass nodes, Highend and Lowend sweetener nodes. Mono vs stereo, a mini effects rack with filters and sync cross delay, a nice metering module behind your nodes to see your soundshapes, and presets that are setup for both vocals and overall mastering make this a small but powerful little tool.

Features:

X2 Precision | Mono/Stereo.

Low/Highpass Nodes.

Control Every Arch.

EQX4 Nodes | Delay w/sync.

Reverb | Filters.

Muffle/Distort | Pan | 40 Presets.

Grab it – free! https://www.toneden.io/lofiradio/post/drake-hold-on-were-going-home

Quick vid:

{See video at top of page}

Made with SynthMaker

http://www.dubturbo.com

EpicPress

EpicPress free compressor by Cut Through Recordings

EpicPress is a free compressor VST, VST3, Audio Unit, LV2 plugin developed by Cut Through Recordings. Compatible OS(s): Windows 64b, macOS.

Dead simple, powerful compression.

Introducing EpicPRESS from Cut Through Recordings! EpicPRESS is designed to be as flexible as possible, giving you full control over your dynamics. This plug-in features stereo-linked compressors to give a smooth and even compression across both channels, as well as automatic make-up gain. The one of a kind display shows the threshold, knee, and output peak level as one.

Features:

  • Attack, release, threshold, knee, and gain controls.
  • Automatic make-up gain.
  • Visualized compression curve.
  • Input/Output meter.
  • Low-latency.
  • Low CPU usage.

Compression

The compression for EpicPRESS comes with the following controls: Attack Time, Release Time, Threshold, Knee width, and Gain.

Attack and release time is measured in milliseconds with attack time ranging from 0 to 300ms, and release time ranging from 20 to 5000ms.

Threshold is measured in decibels and ranges from 0 to -40dB.

EpicPRESS has a soft-knee function which is measured in decibels with a max width of 12dB. 0dB results in a hard knee.

The Display

The display for EpicPRESS is one of a kind. It allows you to visualize what the compression curve looks like. The display to the right of the controls shows a graph of input to output measured in dB. In realtime the input and output are shown as the shaded area under the compression curve.

This compressor will feel at home on any track and any workflow. Add it to your toolbox and find out for yourself.

https://www.cutthroughrecordings.com

Dual Channel FFT

Dual Channel FFT free metering by Christian Budde

Dual Channel FFT is a free metering plugin developed by Christian Budde. Compatible OS(s): Windows.

Dual Channel FFT is a program that analyses the spectral difference between two measurement points. This can be useful to measure the electro- and acoustical chain during a live performance.

Additionally the program can visualize the processing of VST Plug-ins, export the frequency response to TXT/BMP and export the impulse response to WAV.

Dual Channel FFT is free for non-commercial use.

http://www.pcjv.de/

Doffset

Doffset free dc-offset by Wire Grind

Doffset is a free dc offset VST, VST3 plugin developed by Wire Grind. Compatible OS(s): Windows 64b.

Doffset is a free software plugin effect. It is a lightweight tool that corrects DC offset in a signal.

Audio signals often contain DC offset. DC offset is often not easy to recognize when using an audio editor. Offset correction can reduce the magnitude of a signal while maintaining the loudness. This is a potentially useful trick when mastering a track or when fighting in the loudness wars.

Doffset is specially designed to both minimize any coloration to the signal and at the same time respond quickly to any DC offset present in the signal. It offers three modes of operation, each giving a slightly different trade-off between bass response and zero DC convergence time.

http://www.wiregrind.com

Dither

ZynAddSubFX free software-synthesizer by paulnasca 2

Dither is a free dither VST plugin developed by mda. Compatible OS(s): Windows, macOS.

Apply all the standard dither types with fine adjustment of dither level and noise noise shaping, and a “zoom” function for auditioning the result.

http://www.mda-vst.com/

disPRESSA

disPRESSA free compressor by whiteLABEL

disPRESSA is a free compressor VST plugin developed by whiteLABEL. Compatible OS(s): Windows.

disPRESSA is a distortion powered compressor. It’s not a normal math modelled compressor – no threshold, ratio, or knee controls. Instead, disPRESSA uses overdrive as its method of compression. The input channel is overdriven and then measured. Its level is then used to set the level of the clean output channel. The more distortion is piled on, and the higher the contour control, the more the signal is compressed.

It has controls for:

  • Drive.
  • Contour.
  • Make-up.
  • Attack.
  • Release.
  • Sidechain Filter.
  • Distortion model.

A mono version of disPRESSA is available for free (the full version is stereo).

Made with SynthEdit

http://dazdisley.co.uk/whiteLABEL/

Desk

ZynAddSubFX free software-synthesizer by paulnasca 2

Desk is a free console emulation VST, Audio Unit plugin developed by Airwindows. Compatible OS(s): Windows 64b, macOS.

Desk takes the original ‘Desk’ plugins to a new level. Unique modes of analog overload give the ultimate dial-a-warm. The ultimate Airwindows saturation yet, and 96K ready.

Desk3 works really well as two things- as a ‘generic analog console sound’ with a really slick fat overdrive that can run 96K where BussColors can’t, and as a ‘internal mixer stage’. If you wanted to take BussColors (which already imitates a large format analog console exactly) and say, now let us model the wiring harness or longer mic cables or lower the power to the whole console, Desk3 is capable of making those kinds of adjustments, either on the 2-buss or on individual channels or busses (including busses you weren’t including BussColors instances on).

The Overdrive control is what you’d think it is, but Airwindows style—articulate and fluid beyond what most software can do, thanks to the very latest generation of anti-aliasing algorithms. Push it to see what the tone is, then dial it back to use as a subtle enhancement. There is no ‘clip point’ to it, it’s one continuous curve whatever the setting, so don’t go too saturated by mistake expecting to hear a clipping edge appear—it won’t.

The Hi Choke control is unique to Desk3. Go ahead and push it, but you’ll be happiest if you keep this one subtle too. It breaks up in a really unusual way that might be good on snares, but it too is best used as a subtle tone shaper, as the original Desk plugins used it. It’s just that now you can abuse it if you wanted.

Power Sag has two controls, Power Sag and Frequency. You can crank Power Sag to the max to hear where it’s hitting, but then back it off to add dimension and articulation to your sounds in many interesting ways. It basically acts like an analog power supply crapping out, but over a range broader than you’d ever see in real analog gear. Very low values give the SSL haze, very high values do things to the bass. Experimenting is the key here, and you can always keep it extreme if you hit on something that really works:)

http://www.airwindows.com/

DepthCharge

DepthCharge free compressor by 7AIR

DepthCharge is a free compressor VST plugin developed by 7AIR. Compatible OS(s): Windows.

DepthCharge is a compressor plug-in with analogue VU meters and a dimpled metal background. Designed specifically for tracking though it can be used in the master bus chain.

7AIR primarily uses it for drums, guitar and vocals, though it can be used for pretty much anything you throw at it, curbing some high frequencies on synths and pads for example.

Made with SynthMaker

http://www.7air.co.uk/

DCAM FreeComp

DCAM FreeComp free compressor by FXpansion

DCAM FreeComp is a free compressor VST, Audio Unit, RTAS, AAX plugin developed by FXpansion. Compatible OS(s): Windows 64b, macOS.

FXpansion presents DCAM FreeComp, a free circuit-modelled compression plugin in VST, AU or RTAS formats. DCAM FreeComp is a realistic model of a classic console bus compressor design, designed to gel subgroups and entire mixes together while enhancing punch and definition. It’s also excellent at taming peaks in individual tracks and instruments, creative sculpting and heavy, pumping compression effects.

http://www.fxpansion.com/

DC Terminator

DC Terminator free dc-offset by Starplugs

DC Terminator is a free dc offset VST plugin developed by Starplugs. Compatible OS(s): Windows.

DC Terminator provides DC/SUBSONIC analysis and elimination in realtime.

DC or subsonic frequencies cause a muddy and distorted bass perception. DC influences the results of dynamics and filters in a negative way and subsonic frequencies make the speaker compatibility of your mix impossible. This plug-in enables you to terminate DC and subsonic frequencies while processing single tracks or mastering your music.

Features:

  • DC/SUBSONIC analysis in realtime.
  • DC/SUBSONIC eliminating in realtime.
  • DC- or SUBSONIC- level in percent.
Made with SynthEdit

http://www.starplugs.com/