Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
Features:
- 2 Oscillators.
- SawTooth & Pulse waveforms.
No GUI (Uses host’s default).
http://www.stormpages.com/edexter/VstStuffByDexter.htm
Devil is a two oscillator analog subtractive wave table synthesizer capable of producing a broad variety of instruments from throbbing rhythmic basses to really intriguing rhythmic leads. Devil has lots of features. Like 100 waveforms per oscillator for a wide variety of base tones right from the start. Then on the same dialog Devil also has a widener feature for widening the overall tone. Devil also has a spread feature for making the base tone sound more full and rich. Then you can click the properties switch to go into the properties tab of each oscillator. There you will find a curve switch for making waveform more curved which adds a little bit more depth to the tone. Then right next to it you will find an append switch for doubling the waveform to make the waveform a higher frequency. Also in Devil’s properties tab there is a 2 band EQ where you can adjust how much lows and highs you want in your instrument. After that you will find a smooth highs feature to take out what highs you want out of the instrument leaving behind the tone you actually want. Also Devil has a saturation feature for adding a more sine like tone to your instrument which helps the lows and highs sound more smooth. The velocity feature in devil adds momentum to your instrument. From there we move on to the envelope tabs which you will find a drawable adsr for the volume and 2 drawable modulation envelopes to use with the modulation matrix. After that we get to Devil’s filter which there is one per oscillator with a total of 9 different filters. The filters include LP 1, LP 2, LP 3, LP 4, HP 1, HP 2, HP 3 and 2 BP filters that can be adjusted by the cutoff knob which changes the overall tone and frequency of your instrument. Now from there you will find the next set of tabs that each of the two oscillators have. The first tab is the 16 step sequencer which you can use as a source in the modulation matrix if you need rhythm. The sequencer is set to reset and hit on every note. There is also a template selector for using pre-defined sequence patterns. You can also save your own sequence patterns to. To use this feature select a template number make the sequence you want and click save selector and select what number you want it saved to. Now every time you want to use that sequence again you just select that template number. There are 8 template slots that you can save sequences into till you decide on the final sequence that you want to use. The next tab is the LFO tab which there are two Synced LFO’s for each oscillator which can be used as a source with the modulation matrix. Each Synced LFO also has a depth knob for mixing the Synced LFO into whatever target you use. The next tab is the modulation matrix which has 6 sources and 6 targets (sources include: Sequencer Bi-poler, Sequencer Positive, Synced LFO 1, Synced LFO 2, Modulation Envelope 1 and Modulation Envelope 2) (targets include: oscillator volume, oscillator phase, oscillator pitch, filter frequency, filter resonance and distortion). The next tab is Devil’s basic wave shaper for having a little bit more control over the waveforms. You can use it to shape the waveform into a few different waveforms. Devil also has built in effects like distortion, stereo width, reverb and chorus, Devil has one master volume knob for adjusting the overall volume of the instrument. Devil also has a pitch knob for changing the overall tone of the instrument. The pitch controls both oscillators to keep them in sync. Devil also has a mix knob for mixing oscillators both oscillators moving the mix knob will either have oscillator 1 or oscillator 2 the more dominant instrument. Devil is great synthesizer and plus it’s free. So go ahead and try it out. Devil Soundz hopes you will enjoy.
You can check out Devil Soundz YouTube channel. Devil Soundz YouTube channel will have all the latest beats, videos and info about Devil. If your wondering if it is a synthesizer for you. And don’t forget to like and subscribe. If you find Devil Soundz beats interesting.
https://www.devilsoundz.com
The Dead Duck Free Instruments Bundle presents updated versions of four VST classics from mda:
- DJX10 subtractive synth.
- DDX10 FM synth.
- DPiano-A ‘acoustic’ piano.
- DPiano-E ‘electric’ piano.
Available in VST 2.4 format for Windows 32-bit and 64-bit hosts.
https://deadducksoftware.blogspot.co.uk
Dao synth is for Rave, Trance, House and Techno. It was inspired by Soviet analog synths such as Alisa, Estradin and Polyvox.
http://www.tikov.com/softrave/softrave.htm
Features:
- Two oscillators, 4 octaves selector, output level, saw and pulse waveforms, pulse width control on Osc 1, fine tuning up to 1 octave on Osc 2.
- Noise generator.
- One LFO with:
– Rate from 0.1 to 100 Hz.
– MIDI sync from 32/4 to 1/36.
– Filter cutoff and Osc pitch destinations.
– 6 shape modes, sample&hold.- Multimode “vintage” resonant filter with key following function, LP, BP, HP.
- Two envelope generators, VCA and Filter control, with REPEAT function (loop the envelope).
- Polyphonic mode (2 to 16 voices) and mono legato mode with tunable glide effect.
- MIDI learn on every knob to freely assign any MIDI CC.
- MIDI velocity sensitivity adjustable independently for VCA and Filter envelope.
- Master volume.
- Master tuning.
- Virtual keyboard with hide/show button.
- 128 presets factory bank.
- Random presets generator.
- Saving default setting on registry option.
- Any Sample Rate supported (e.g: 44.1, 48, 96).
- Support for SSE, MMX and P4 instructions.
- Volume Type: High, Normal, Soft.
The Universal Binary version for Intel Macs (included the 64-bit versions) and an optimized update for Windows (32- and 64-bit) are available for a minimum suggested donation of $9.
http://nusofting.com/
Daedalus is a polyphonic synthesizer with special attention paid to MIDI controls such as Pitch Bend, Modulation Wheel, Velocity and Aftertouch. It has been developed for the performing musician in mind.
Key Features:
- VCO
- 2 Pulse width modulated oscillators
- Octave tune
- Semi tune
- Fine tune (VCO2)
- Keyboard tracking
- Envelope modulation
- PWM mode and modulation
- VCO2-to-1 modulation
- Oscillator sync
- MIXER
- Oscillator volume
- Dual mode noise oscillator
- Ring-modulation
- HPF
- 1 separate 12dB/octave hipass filter
- VCF
- 4 filter modes (1x 12dB/oct, 3x 24dB/oct.)
- Envelopes (ADSR)
- VCO,VCF and VCA
- LFO
- 2 BPM syncable LFOs
- Shape
- Shape invert
- Rate
- Trig mode
- Modulation destinations and sources
- MASTER
- Key mode (mono, poly and unison)
- Unison detune
- Main tuning
- Main Volume
- Extensive MIDI Control section including
- Pitch Bend
- Modulation Wheel
- Portamento
- Play dependant release control
- EFFECTS
- Chorus
- Delay
- Arpeggiator
http://www.omnitaur.se/
Cyclone is a clone of a machine that runs Typhoon: a complete TX16W software emulator in VST and Audio Unit formats.
Cyclone is a true low-level hardware emulator. It simulates all the important circuits of the Yamaha TX16W, including the main 68000 CPU, the proprietary Yamaha DSP circuits, the 12-bit sample memory and the 400kHz non-linear DACs. Cyclone not only looks like a real TX16W, it sounds like a real TX16W and it runs the exact same software as a real TX16W.
That last sentence is worth elaborating on. Sonic Charge have not merely created a new virtual instrument with a vintage sound, neither is Cyclone an updated version of Typhoon. Cyclone features a full 68000 emulator that runs the exact same version of Typhoon that was released 14 years ago. This implies that using Cyclone will require a bit more effort than your average modern virtual instrument. But this can also be a very rewarding experience. Regard Cyclone as a time travel portal to an era from the past. The era of the monster dinosaur samplers.
http://soniccharge.com/
Curve 2 CM is a reduced version of Curve 2, featuring the same filter settings, 16-voice unisono mode, legato modes and unique waveform editor for broad oscillator timbres and sound manipulation.
It ships with Curve 2’s online preset sharing system, has 2 OSCs, 1 LFO, 2 envelopes and 3 macro controls. Powered by Curve’s sound engine, it has the same excellent sound quality. Make sure to check its preset library—tuned for its feature set and with a variety of sounds, created by skilled preset designers.
Purchasers of Computer Music Magazine 188 (or any later issue) will get Curve 2 CM with the magazine.
For 3 OSCs with noise generation and waveform crossfade, for 4 LFOs, 3 EGs, 4 macro controls, additional richness for the sounds, more depth for pads and more rhythmic options, as well as for tons of additional presets (3000+ presets at the time of writing), check the Curve 2 demo—it is fully functional and has no time limit.
{See video at top of page}
http://www.cableguys.com
Cumulus is a granular sampler which radically transforms sample content by breaking it into tiny slithers of audio called grains and reorganizing them to form new sounds. Cumulus is capable of a wide ranges of timbres: from evolving atmospheric soundscapes; to organic physical textures.
Up to eight Scenes can be created; a Scene corresponding to a particular sample position and set of synthesis parameters. Scenes can be played in realtime via MIDI, or arranged internally using the built-in sequencer.
Cumulus is available free on the cover-mounted DVD of Computer Music magazine.
http://www.loomer.co.uk/
Crio is a virtual analog/FM/Ring modulation synthesizer to make arpeggios, bass, solos, leads, FX-style sounds. Its goal is to achieve maximum functionality with minimal controls, to be used at studio or live, with facilities to drastically modify the sounds while playing.
The LFO has special functions for rhythmic uses, such as quantization of waveforms synchronized with tempo. For example, If the user applies tone modulation from the LFO with quantization, the resulting tones are forced to a scale, like an autotuner. An interesting result occurs when quantized noise wave is selected there.
The modulation wheel can be linked to the overall function of the LFO. Therefore, the user must use that wheel to check the importance of the sound modifications that can be done. For example, in certain presets, the player can use the modulation wheel to add automatic tone variations.
Features:
– 1 monophonic oscillator with:
noise generator
3 voices, including sub oscillator.
Frequency modulation (FM)
Ring modulation (RM).
– 1 LFO with functions of wave quantization and tempo synchronization.
– 2 filters: typical state variable filter and comb filter.
– 1 envelope generator.
– 1 amplifier with booster and saturation.
– slide tone control that applies to keyboard and tone modulation from LFO.
– MIDI learn in most of the controls.
https://solcitomusica.blogspot.com.ar/
