Autospread Box

ZynAddSubFX free software-synthesizer by paulnasca 2

Autospread Box is a free stereo imaging VST plugin developed by Synthescience. Compatible OS(s): Windows.

The Autospread Box is a Stereo Imaging processor which works by means off applying a small amount of delay into one of the audio channels, inverts it, and then adds some modulation to achieve its characteristic sound.

However it is relevant to state that this effect is only intended for stereo use and will work best on audio material with no relative difference between the left and right channels (for example any unprocessed sound where the sound in the left channel is exactly the same as in the right channel as in a dual mono signal). If you feed it with any kind of processed sound where the left channel sound content is different from that on the right channel, the resulting sound may be so subtle that could lead the user to think that its not there at all, but if one happens to turn the effect on and off, the difference will be noted.

Keep in mind that this is an effects processor that works on the subtle side of things but nevertheless it can impart some real vibes to your sound, as so experimentation is a must.

The Autospread Box is fully automatable and has the ability to store 32 presets. It ships with a few already pre programmed ones that will show what its all about and may be the starting point to your individual creations.

Installation procedure: Unzip the file, then copy the DLLs into your VstPlugins folder.

Made with SynthEdit

AutoSpectre 248

AutoSpectre 248 free stereo-imaging by Acousmodules

AutoSpectre 248 is a free stereo imaging VST plugin developed by Acousmodules. Compatible OS(s): Windows.

Description:

  • Division of the two audio inputs by six crossover filters.
  • Spatial position of the eight resulting filter bands inside an octophonic space.
  • Independent levels control.
  • Can be used in 5.0, 6.0, 7.0 and 8.0 mode.
Made with SynthEdit

http://acousmodules.free.fr/

AutoSpectre 246

AutoSpectre 246 free stereo-imaging by Acousmodules

AutoSpectre 246 is a free stereo imaging VST plugin developed by Acousmodules. Compatible OS(s): Windows.

Description:

  • Transformation of a stereo signal into 5.1 surround format.
  • Division of the two audio inputs by three crossover filters, plus a low pass.
  • Routing of the eight resulting filter bands on six outputs.
  • Independent levels and mix control.
Made with SynthEdit

http://acousmodules.free.fr/

Autopan Modulator

Autopan Modulator free panner by Synthescience

Autopan Modulator is a free panner VST plugin developed by Synthescience. Compatible OS(s): Windows.

The Autopan Modulator is an effects processor designed to work around the stereo field of any given audio source. It can be programmed to make your tracks bounce from side to side of the audio field with several modulation options at your choice. If anyway you want to keep it simple, it will allow you to do so manually.

The Autopan Modulator is fully automatable and has the ability to store 32 presets. It ships with a few already pre programmed ones that will show what its all about and may be the starting point to your individual creations.

Installation procedure: Unzip the file, then copy the DLLs into your VstPlugins folder.

Made with SynthEdit

Automathico

Automathico free studio-tool by SirSickSik

Automathico is a free studio tools VST plugin developed by SirSickSik. Compatible OS(s): Windows 64b.

The Automathico is a MIDI note generator based on looped mathematical calculations.

It’s mainly build up from 3 parts:

A fairly small knob-automation recorder which lets you internally automate knob adjustments, a bit bigger part is saved for the rhythmic section and the main part of the display is saved for knobs and selectors for the 6 (almost) identical sequencers.

Two sequencers are for the main base (stable en-harmonic and chord (offset from en-harmonic scaled into the right scale and key).

The other four are for two separate sequencers for both pitch and velocity, so two different patterns can be created together following the same structure (enharmonics and chords).

These 6 sequencers are based on a sample&hold loop in which a series of mathematical calculations are put over the looping values. First a waveshaper, then a parabolic function and finally a math-algorithm like sine, tanh, power, square root. The sequencers all have their own clock-divider and sync-option to enforce recurring patterns and next to this the pitch and velocity sequencers have an extra feed option which allows to feed a value of another sequencer into it’s loop via modulating math-functions. As last there is a dedicated LFO for each of the 6 sequencers to modulate one of the parameters, which, in different combinations can yield very interesting results as patterns evolve.

The rhythmic and melodic sections work together to assign the current pitch and velocity values to the note generators in arp-mode. When the switch is down, depending on whether the pitch-sequencer is playing between 0-25%, 25-50%, 50-75% or 75-100%, the most right, middle-left, middle-right, most right midi-note generators respectively will be triggered. As each of these can send on a different MIDI channel, each keyboard-range can be played by a different external synthesizer or sampler (VSTi or hardware).

Together this creates a very dynamic sequencer which can change the mood and rhythm with a single turn of a knob (if you turn the right knob for that of course).

You can use it to control both VSTi or hardware synthesizers or samplers (depending on the MIDI-routing capabilities of your MIDIhost, Cubase and Fruity Loops are for example known to do the job).

For more information, explanation, help and tips&tricks, download the zip and check the help-file.

Next to that, just have fun with it! My pleasure is making music and if I can share that pleasure, I am happy.

(P.S. Below in the comments there is a link to a 16-VST pack with my latest plugins, two which I made to combine with automathico to be able to easier route MIDI channels to different VSTi. The rest I added as these were too big to go directly to my free-VST thread and I wanted these be uploaded anyway)

KVRDC12

Made with SynthEdit

http://www.synthforum.nl/forums/showthread.php?t=148955

Automap

Automap free other-utility by Novation

Automap is a free audio and studio utility VST, VST3, Audio Unit, RTAS plugin developed by Novation. Compatible OS(s): Windows 64b, macOS.

Automap is free software that comes with all Novation controllers. It gives you instant access to your DAW and plug-ins so you can get hands-on control of your music software. It features a software edit page that graphically shows what is assigned to which knob, fader or button on the hardware. Automap 4 has a re-designed GUI and now features a notification system that pops up in the corner of your monitor to tell you what you are controlling when you move a knob, slider or button.

Automap 4 was launched with Novation’s new Impulse controller keyboard range in Summer 2011. The v4.1 update now enables Novation’s top of the range SL MkII controllers to work with Automap 4 for instant assignment and convenient control. Other Novation controllers and keyboards are now also compatible with Automap 4 including: Nocturn, Launchpad, UltraNova, ReMOTE SL, Nocturn Keyboard and the SL Compact.

Automap is the original music software control technology. It was launched in 2006 and has evolved over the years with significant workflow improvements. Automap 4 is simple to set up and start using right away, and gives you unparalleled control over your DAW and plug-in instruments/effects.

http://www.novationmusic.com/

Automat

Automat free software-synthesizer by alphakanal

Automat is a free software synthesizer developed by alphakanal. Available format(s): Audio Unit for macOS.

Automat is a polyphonic stereo subtractive synthesizer.

Features:

  • Subtractive synthesis.
  • 3 anti-aliased oscillators.
  • Filters and amplifier.
  • 2 ADSRs for filter and amplifier.
  • 6 modulators with tempo sync.
  • Waveshaper / Eq.
  • Delay with tempo sync.
  • Modulated spatial effect.
  • Poly-, unisono and legato-mode.
  • MIDI learn.

http://www.alphakanal.de/

Autogun

Autogun free software-synthesizer by Image Line

Autogun is a free software synthesizer developed by Image Line. Available format(s): VST for Windows.

Autogun offers 4,294,967,296 (Four Billion Two Hundred Ninety Four Million Nine Hundred Sixty Seven Thousand Two Hundred Ninety Six) presets, just waiting to be explored for their acoustic potential.

Autogun is based on the Ogun VSTi synthesizer that can produce rich metallic and shimmering timbres, although it’s not limited to these sounds as Autogun will demonstrate. Ogun’s distinctive synthesis engine can generate more than 32,000 harmonics, modulated by high-level ‘harmonic mapping’ functions. These synthesis parameters have been put under the control of an artificial intelligence, patch creation algorithm, the reason Autogun can deliver such a huge number of presets.

Every Autogun is set to start from a unique preset number, so that each Autogun user is assigned a personal starting preset-address, ready to explore. However, users can at any time, jump to a new location in the preset-space by simply entering a preset number.

With so many presets Autogun needs no programming, every sound is already somewhere ‘out there’ and just needs to be found.

Key features:

  • Based on the Ogun synthesis engine.
  • Enhanced by the Soundgoodizer, (Maximus) engine.
  • 4,294,967,296 presets to explore.
  • Preset number copy/paste field.
  • Preset up/down buttons.
  • Volume control.

https://www.image-line.com/

AutoFilter

AutoFilter free filter by Stagecraft Software

AutoFilter is a free filter VST, VST3, Audio Unit, AAX plugin developed by Stagecraft Software. Compatible OS(s): Windows 64b, macOS.

SC Autofilter gives you all the essential functionality you’d expect from an autofilter, along with features designed specifically with the DJ/electronic musician in mind. Parameters are fully automatable, quantizable, and a display showing filter response and output FFT allows you to see the filter’s effect in real-time:

  • Variable lowpass filter.
  • LFO control for frequency and resonance of filter.
  • LFO % (range of frequency swept by an LFO).
  • Duty cycle warping.
  • Wet/dry mix.
  • Full parameter automation.
  • Preset sharing.

http://www.stagecraftsoftware.com

Autodafe XoX Drums for Kontakt

Autodafe XoX Drums for Kontakt free soundbank by Autodafe

Autodafe XoX Drums for Kontakt virtual instrument is a free drums sound bank for Kontakt, by Autodafe.

Autodafe XoX Box is a Drum Machine for Kontakt (FULL version of Kontakt 5.6 needed, it will not work on the free Kontakt player) based on samples of Roland Drum machines of the XoX series (606, 707, 808 and 909). All samples come from free sources and are believed to be free/public domain.

The Main Instrument has 5 vertical Slots:

  • Kicks.
  • Snare/Rim/Clap.
  • Hats (Closed, Open, Pedal).
  • Cymbal/Cowbell.
  • Toms (Hi, Mid, Low) for a total of 12 sounds.

Each Slot has different selectable kits of sounds: 28 Kicks, 28 Snares/Rim/Clap combinations, 12 Hats combinations (Closed, Open), 8 Cymbals/Cowbells, 8 Toms combinations (Hi, Mid, Low) allowing many different combinations of samples.

Each slot has separate Level, Pan and Tune controls for fine editing and fine-tuning of the samples.

Each slot has two separate controls for Attack and Sustain of the onboard transient shaper.

Each slot has Solo/Mute buttons, to Solo and Mute sounds in the slot.

Each slot has an independent selectable Filter: Filter Type (different LowPass, HighPass), with Cutoff and Resonance controls.

Each slot has an independent Distortion section with selectable Type (Tube or Transistor) and Level control.

Each slot a dedicated Reverb Send Level, which controls the amount of sound that is sent to the Reverb bus channel.

DRM32 Analog Drum Machine has an onboard Drum Sequencer with 32 selectable patterns, as well as a dedicated Drum Delay and Reverb.

The instrument will normally load as a stereo instrument, but can be switched to Multi-Output, with user assignable outs.

http://www.autodafe.net/