Downloads | Page 187 of 316

Jumper

Jumper is a free midi controller VST plugin developed by Fanan Team. Compatible OS(s): Windows.

Jumper is MIDI based VST instrument that allows live performers to play with up to 16 VST instruments on stage or in live jams. By using your keyboard’s MIDI cc buttons, the user can instantly switch between instrumets that opened in his favorite DAW. Jumper can also split the physical keyboard into 2 zones and route instruments to keyboard’s upper and lower zones. Each instrument button routes the MIDI signal to the matching VSTi instrument in the DAW through a matching MIDI channel (from 1 to 16) as long as it set to receive MIDI signal from outsource.

{See video at top of page}

https://www.fananteampro.com/

Juicy 77

Juicy 77 is a free overdrive and saturation VST plugin developed by BTE Audio. Compatible OS(s): Windows.

Juicy 77 is a High Gain Amplifier Simulator.

Juicy 77 is the outcome of a research project which aims to investigate state of the art methodologies for mathematical modeling and numerical simulation of analog signal processing equipment. Its preamplifier section is inspired from an early 90’s rack mount preamplifier manufactured by a legendary amplifier manufacturer located in the northwestern USA. The power amplifier section simulates standard pentode powered push-pull output stages. The loudspeaker cabinet simulator section includes seven classical cabinet types.

http://www.bteaudio.com/

jsCompShaper

jsCompShaper is a free compressor VST plugin developed by jsAudio. Compatible OS(s): Windows.

jsCompShaper is a flexible soft-knee compressor/waveshaper which can seamlessly morph between these two operating modes. It provides pre-/post-emphasis filtering (similar to a side-chain filter) for frequency-dependent compression and waveshaping, as well as an analog-like attack/release curve. Furthermore, it supports parallel compression and oversampling.

Features:

Blendable compression and waveshaping in a single plug-in.

Variable knee hardness.

Frequency dependent compression/waveshaping using a pre-emphasis EQ.

Parallel compression via the mix knob.

1x to 16x Oversampling.

VU and peak metering of input or output.

GR metering.

A/B states for quick comparison.

Full 64 bit double precision processing.

http://electric-snow.net/plugins.html

jparacomp

jparacomp is a free compressor VST, VST3, Audio Unit plugin developed by jhudstudio. Compatible OS(s): Windows 64b, macOS.

Summary:

1. jParaComp supports Windows/64-bit/VST2/VST3 ***VST3 will be uploaded later*** Mac/64-bit/AU 32-bit will not be supported unless enough requests.

2. Have a stereo track that has too many peaks on one side? Compress Left and right sides independently.

3. If used right, it can be used as a nice stereo effect for any instrument.

4. Built in clipping can stop the signal from going past 0 dB.

5. free.

6. Preset loader/save. I will be making presets at some point to add to the plugin.

7. Change background color. Currently there is only red and blue.

Donate? Donations help motivate me to make more free plugins. I will appreciate whatever donation about is giving.

http://jhudstudio.com/

JP7A

JP7A is a free software synthesizer developed by GTG Synths. Available format(s): VST for Windows.

Features:

6 voice analog synth.

24 dB filter with LP, HP and BP settings.

Osc sync and pitch envelope.

Mono mode with 4 key priority choices.

Pitch bender with 3 ranges.

MIDI automation.

http://www.gtgsynths.com/

JP-ME-1

JP-ME-1 is a free reverb VST, VST3, Audio Unit, AAX plugin developed by [BEN/SCHULZ]. Compatible OS(s): Windows 64b, macOS.

JP-ME-1 emulates a famous 1980ies digital reverb made by a well know japanese manufacturer. It features twelve iconic sounds that can be recalled with only six buttons. JP-ME-1 is available as VST/AU/AAX and Standalone for Win and Mac.

https://schulz.audio/

JP-4c

JP-4c virtual instrument is a free sound bank for Reaktor, by Alex Shore.

In 1996 Roland released the JP-8000, their first virtual analogue modeling synthesiser. The JP-8000 became very famous for one thing, the Super Saw. This unique sound helped define the trance music genre and is still commonly used in electronic dance music production today.

The JP-4c is a Reaktor patch designed to emulate the infamous Super Saw oscillator.

The JP-4c is built upon a combination of research conducted by myself and other individuals, with the patch being able to effectively emulate the original Super Saw’s unique timbre. Detailed research and analysis of the Super Saw found that the oscillator exhibits some interesting characteristics giving it a particular sound.

Perhaps the most important element is the detune curve. Whereas many synthesisers would commonly use a linear detune amount, the Super Saw was found to have a varying detune amount through the use of a curve. This curve allows the user a much finer control over the detune amount applied to the oscillator, allowing them to create very smooth sounds with a minimal amount of detune or seemingly harsh textures as the amount is increased. This parameter has been accurately implemented within the JP-4c to achieve the same detune characteristics as the original.

The original Super Saw oscillator makes use of a high pass filter to cut the harmonics below the fundamental frequency. This filter helps give the Super Saw its characteristic bright sound by attenuating the low frequencies while also shaping the waveform, producing a smoothing effect seen at the peaks. This effect has been carefully recreated within the JP-4c to achieve the same rich tone as the original.

Along with these, additional features have also been reproduced and implemented including a built array of sound shaping controls and effects detailed below.

Specifications:

Super Saw Oscillator – Effective emulation of Roland’s original layering of seven sawtooth waveforms.

Second Oscillator – Four switchable waveform types (Triangle/Sine/Saw/Pulse).

Filter – Selectable Low Pass, Band Pass and High Pass with key follow.

Modulation – 2x LFOs, Filter Envelope and Pitch Envelope.

Effects – Tone Control, Distortion, Reverb, Chorus, Stereo Spread and Portamento.

32 Factory Presets – 12 Leads, 8 Pads, 5 Plucks, 4 Basses and 2 Effects.

Download Includes:

JP-4c Reaktor Patch.

An Analysis of the Super Saw Oscillator and its Relation to Pads within Trance Music (Research Project).

Read Me Guide.

Demo:
All sounds are directly from the JP-4c with no external effects used.

https://soundcloud.com/alexshore/jp-4c-demo

http://alex-shore.com

Jost

Jost is a free routing and wrapper plugin developed by Jucetice. Compatible OS(s): Linux.

http://www.anticore.org/jucetice/

Joker Tones

Joker Tones virtual instrument is a free sound bank for Kontakt, by Rast Sound.

Inspired by the story and character of Joker, we couldn’t resist to produce this free library offering dark, deep, mad and nostalgic instruments and sounds for Kontakt & WAV.

{See video at top of page}

Features.

+ 370 MB for Kontakt & WAV.

+ 80 Samples & 10 Solo Instruments.

+ Ambiences, Hits & More.

+ Kontakt full version 5.8.3.

http://www.rastsound.com

jHammerEZ

jHammerEZ is a free compressor and eq VST, VST3, Audio Unit plugin developed by jhudstudio. Compatible OS(s): Windows 64b, macOS.

Summary:

jHammerEZ supports Windows/64-bit/VST2/VST3 (VST3 will be uploaded later) Mac/64-bit/AU 32-bit will not be supported unless enough requests.

Use the noise gate to cut unwanted signal in between silent parts. Simply Thin/fat the sound, compress, de-ess, and clip it. Just that easy.

Hover over each knob or button to find out what it does.

Preset loader/save. I will be making presets at some point to add to the plugin.

Advanced controls. Added for those who want more control over settings. Example, attack and release settings for the compressor.

Change background color for both Main controls and Advanced controls. Currently there is only 2 color modes.

Donate? Donations help motivate me to make more free plugins. I will appreciate whatever donation about is giving.

http://jhudstudio.com/