Free Audio Plugins & Softwares. All the Best VST & Audio Units Available for Free.
TubeBaby is a digital simulation of a tube guitar amplifier. As such it features the standard controls found on a real amplifier, namely gain, bass, mid, treble, presence, master and, as the latest addition, a switch for activating the high gain mode of the preamp stage.
http://www.ndzeit.org/
Tube Amp is an audio effect plug-in that applies asymmetric tube triode overdrive usually found in single-tube microphone pre-amp boxes. The sound this plug-in produces varies from a mild “warm” overdrive to a fuzzy distortion. Beside that, Tube Amp includes a -6 dB/oct low-pass filter that is built-in into plug-in’s valve modeling equation, and can be used to imitate a lower-quality tube triode.
Tube Amp also features all standard advanced Voxengo plug-in features like full multi-channel operation and built-in oversampling.
Features:
- Asymmetric tube triode overdrive.
- Multi-channel processing.
- Internal channel routing.
- Channel grouping.
- Mid/side processing.
- Up to 8x oversampling.
- 64-bit floating point processing.
- Preset manager.
- Undo/redo history.
- A/B comparisons.
- Contextual hint messages.
https://www.voxengo.com/
DSP Bass processing unit with analog modeling of a bass stompbox.
https://www.tseaudio.com
TS-999 “SubScreamer” is a digital emulation of an overdrive pedal for guitar. It has been developed to accurately model its real hardware counterpart, built for Subhuman guitarists Matteo Buti and Elia Murgia by Ignite Amps in 2010.
The TS-999 core circuit is inspired by the most famous green “808” overdrive pedal, with additional features to increase its versatility. It can easily add dirt and bite to clean guitar tones, as well as make the amplifier distortion sound tighter, more focused and more responsive to picking, avoiding low-end muddiness and high-end fizz.
Every single component on the signal path of the real analog circuit has been taken into account and modeled in the best possible way to match the original sound, keeping an eye to CPU performances and real-time playability at the same time.
TS-999 is meant to be used as an overdrive pedal for live playing, tracking or mixing inside hosts capable of VST or AU Plug-Ins support.
Main Features:
- Dynamic 2N3904 BJT input and output buffers analog modeling.
- Dynamic 1N4148 diode clipping circuit analog modeling.
- Op-amp saturation analog modeling.
- Symmetric / Asymmetric clipping mode.
- Normal / Fat bass response mode.
- Mono / Stereo processing support.
- Switchable Input and Output Buffer modeling to decrease CPU usage.
- Selectable oversampling rate (up to 8x).
- Variable Input Level control for better response to different pickups.
- Double precision (64-bit) floating point mathematical model.
- Fully automatable controls.
- Zero latency.
http://www.igniteamps.com/
TS’ Secret is a vintage overdrive effect plug-in.
More information regarding TS’ Secret (Tube Screamer’s Secret) can be found in this article.
http://www.bteaudio.com/
The TPA-1 is a digital emulation of a class AB tube power amplifier for guitar.
It has been designed and developed to be paired with any guitar preamp (VST/AU or even hardware).
Its circuit is not based on any particular physical power amplifier, but it has been designed to have enough versatility to range from vintage to modern tones, letting the user be free to shape its dynamic behaviour with ease, without the need to be a tube amplifier tech.
Every single component on the signal path of the analog circuit has been taken into account and modeled in the best possible way to match the original sound as it was meant to be, while keeping an eye on CPU performances and real-time playability at the same time.
The TPA-1 is meant to be used as a guitar tube power amplifier simulator for live playing and jamming, tracking or mixing inside hosts capable of VST or AU Plug-Ins support.
Main Features:
- Dynamic EL34 / 6L6GC / KT88 pentodes/tetrodes analog modeling (push-pull stage).
- Dynamic ECC83 / 12AX7 triode analog modeling (phase inverter stage).
- Mono / Stereo processing support.
- Selectable oversampling rate (up to 8x).
- Global input / output level controls.
- Double precision (64-bit) floating point mathematical model.
- Fully automatable controls.
http://www.igniteamps.com/
The ToneDeluxe is designed as a full analog tube amplifier from preamp stage to cabinet. Based on ECC83 and EL34 tubes, its analog time model design allows to reduce the delay of the signal processing and thus give a “pleasure of playing” for guitarists. It offers two independent channels : clean and high gain. The high gain chanel is versatile thanks to the DriveTone setting that cut/boost high frequency before the tone stack.
Features :
- Two channels with independent gain/volume.
- ECC83 & EL34 simulation.
- Based on analog time model.
- Full tone stack.
- Drive is volume responsive.
- Two springs reverb models.
- Five cabinet models.
Available in 64-bit VST and Audio Unit Plugin.
New version 1.0.1 (improve compatibility with 96 kHz and framelength up to 8192)
New version 1.0.2 (solve crash or no sound issue for framelength of 64 samples)
New version 1.0.3 (improve stability, fixe crash on multiple instances)
New version 1.1.1 : support 32-bit win VST and VST3 format. Available as Mac VST And AU. Great improve of stability and performances.
{See video at top of page}
http://www.lostin70s.com
Splits the incoming signal into three frequency bands. First out pair is lowpass, second out pair is bandpass, third out pair is highpass. Bandpass covers the range between the lowpass and highpass cutoff frequencies even if low and high cross over.
http://www.tinygod.com/
Distortion and bitcrusher unit. Sample decimation adjustable down to 40:1, sample quantization from 24 bit to 1 bit, several different forms of waveshaping distortion, variable-hardness clipping, and a gain knob that goes to 11.
http://www.tinygod.com/
thrummaschine is a 3-band distortion effect with independent, LFO-driven, filters. Make your bass, mid and high frequencies oscillate at different speeds, shapes and pan, with whatever flavour and level of distortion you dial in for each band.
Features:
- 3 user-defined bands for bass, mid and high frequencies, with overlap if required.
- 3 filters with tempo-sync LFO, for each freq band.
- Overdrive, distortion and bitcrush effects.
- Send level for each band to each effect.
- Pan and volume for each band.
https://delamanchavst.wordpress.com